MIC-3927 Datasheet, PDF (1/2 Pages) Advantech Co., Ltd. – CompactPCI® Intelligent Chassis Management Module (PICMG® 2.9)

MIC-3927
CompactPCI^® Intelligent Chassis
Management Module (PICMG^® 2.9)
Features
 Compatible with PICMG 2.1, 2.16, and 2.9-compliant components
 Monitors via the Intelligent Platform Management Bus (IPMB) protocol
 Provides isolated IPMI signals for each slot for maximum security and
reliability
 Out-of band management interface
 Hot swap support for IPMI based field replaceable components
 Alarm cut off push button on the front panel
 Standalone system monitoring: no driver needed, independent OS
RoHS
COMPLIANT
2002/95/EC
Introduction
The MIC-3927 is a proprietary form factor Chassis Management Module (CMM) intended for use with PICMG* 2.1, 2.16, and 2.9-compliant systems (the CompactPCI* Hot Swap,
Packet Switching Backplane, and System Management specifications respectively). The MIC-3927 plugs into a dedicated slot in compatible systems. It provides centralized management
and alarm notification for system power supplies and fans as well as single board operation status. The CMM may be paired with a backup for high-availability applications.
The MIC-3927 is essentially a special-purpose single board computer with a CPU, some memory, a PCI bus, an operating system and peripherals. The MIC-3927 monitors and
configures IPMI-based components in the chassis. When the thresholds for temperature and voltage limitations are reached or when failure occurs, the CMM will capture an event.
At the same time, the MIC-3927 sends SNMP traps and drives the Telco alarm relays that trigger onboard LEDs. The CMM can query FRU information (such as serial number, model
number, manufacture date, etc.), detect presence of components (such as fan tray, CPU board, etc.), and monitor the status of each component.
The MIC-3927 also has a built-in Web-based administration interface that allows users to monitor the system’s operation from any place with Internet connectivity. The MIC-3927
adds another dimension to the reliability of your most critical applications.
*IPMI function only supported for MIC-3390 and MIC-3392
Sensor Specifications
Voltage
Temperature
Fan Speed
Power Good
CPU Board Health
Digital Input/Output (optional)
Input
Input
Sensor
Interface
Range
Input
Range
Input
Range
Interface
Input
Max. SBC Monitoring
Input
Output
+3.3 V_DC, +5 V_DC, -5 V_DC, +5 V_SB, +12 V_DC, -12 V_DC, VBat
1 (onboard)
Thermistor
I2C
-40 ~ 120° C (-40 ~ 248° F)
9
700 ~ 10000 rpm
4
High > 2.4 V_DC, Low < 0.8 V_DC
I2C
CPU Vcore, CPU fan, CPU temperature (up to 2 CPUs), DC +5 V, DC -5 V, V (I/O), DC +12 V, DC -12 V
8 boards
4
4