MIC-3714 Datasheet, PDF (1/1 Pages) Advantech Co., Ltd. – 250 kS/s, 16-bit, 16-ch CPCI Multifunction Card

MIC-3716
MIC-3714
MIC-3723/3723R
250 kS/s, 16-bit, 16-ch CPCI Multifunction
Card
30 MS/s, Simultaneous 4-ch Analog Input
CPCI Card
16-bit, 8-ch Non-isolated Analog Output
CPCI Cards
MIC-3716/3
MIC-3714/3
MIC-3723R/3
MIC-3723/3
Specifications
Analog Input
 Channels
 Resolution
 Max. Sampling Rate
 FIFO Size
 Overvoltage Protection
 Input Impedance
 Sampling Modes
 Input Range
16 single-ended, 8 differential, or
combination
16 bits
250 kS/s
1024 samples/ch
30 Vp-p
100 MΩ/10 pF (Off); 100 MΩ/100 pF (On)
Software, pacer, or external
Bipolar
Unipolar
Accuracy (% of FSR ±1LSB)
Analog Output
 Channels
 Resolution
 Output Rate
 Output Range
±10 ±5 ±2.5 ±1.25 ±0.625
- 0 ~ 10 0 ~ 5 0 ~ 2.5 0 ~ 1.25
0.15 0.03 0.03 0.05
0.1
2
16 bits
Static update
Internal
Reference
Bipolar
Unipolar
External Reference
 Slew Rate
 Driving Capability
 Output Impedance
 Operation Mode
 Accuracy
Digital Input/Output
 Channels
 Input Voltage
 Output Voltage
 Output Capability
Counter/Timer
 Channels
Applications
 Compatibility
 Resolution
 Max. Input Frequency
 Reference Clock
General
 PICMG Compliance
 Bus Type
 I/O Connector Type
 Dimensions
 Power Consumption
 Certifications
±5, ±10
0 ~ 5, 0 ~ 10
0 ~ +x V @ +x v (-10 ≤ x ≤ 10)
-x ~ +x V @ +x v (-10 ≤ x ≤ 10)
20 V/µs
±20 mA
0.1 Ω max.
Single output
Relative: ±1LSB
16, 5V/TTL
Logic 0: 0.4 V max.
Logic 1: 2.4 V min.
Logic 0: 0.4 V max.
Logic 1: 2.7 V min.
Sink: 0.4 V max. @ +8 mA
Source: 2.4 V min. @ -0.4 mA
3
5 V/TTL
16 bits
1 MHz
Internal 10 MHz
External Clock Frequency 10 MHz
External Voltage Range TTL (Low: 0.8,
High: 2 V)
CompactPCI V2.0, R 2.1 Hot-Swap V2.1, R
2.0
CompactPCI
68-pin SCSI-II female
160 x 100 mm (6.9" x 3.9") with 3U Bracket
Typical: +5 V @ 850 mA, +12 V @ 600 mA
Max.: +5 V @ 1 A, +12 V @ 700 m A
CE
Ordering Information
 MIC-3716/3
 PCLD-8710
 PCL-10168
 ADAM-3968
3U, 250 kS/s, 16-bit, 16-ch
High-Resolution Multifunction Card
Industrial Wiring Terminal Board with CJC
circuit for DIN-rail Mounting. (cable not
included)
68-pin SCSI-II cable with male connectors
on both ends and special shielding for noise
reduction, 1 and 2 m
68-pin SCSI-II Wiring Terminal Board for
DIN-rail Mounting
Specifications
Analog Input
 Channels
 Resolution
 Max. Sampling Rate
 FIFO Size
 Overvoltage Protection
 Input Impedance
 Sampling Modes
 Input Range
General
 Bus Type
 I/O Connectors
 Dimensions (L x H)
 Power Consumption
 Operating Temperature
 Storing Temperature
 Storing Humidity
 Certifications
4 single-ended channels
12 bits
30 MS/s (Only in FIFO
32k)
32,768 samples/ch
30 Vp-p
50 Ω/1 MΩ/jumper
selectable, 100 pF
Software, pacer, post-
trigger, pre-trigger, delay-
trigger, about-trigger
(V, software
programmable)
CompactPCI
4 x BNC connector (for
AI)
1 x PS/2 connector (for
ext. colock and trigger)
160 x 100 mm (6.3" x
3.9") with 3U bracket
Typical: +3.3 V @ 550 mA
, +5 V @ 150 mA ,
+12 V @ 600 mA
Max.: +3.3 V @ 850 mA,
+5 V @ 200 mA,
+12 V @ 700 mA
0 ~ 70° C (32~158° F)
-20 ~ 85° C (-4 ~ 185° F)
5 ~ 95% RH,
non-condensing (refer to
IEC 68-2-3)
CE and FCC certified
Ordering Information
 MIC-3714/3
 ADAM-3909
 PCL-10901-1
 PCL-10901-3
 PCL-1010B-1
3U, 30 MS/s
Simultaneous 4-ch
Analog Input Card
DB-9 Wiring Terminal for
DIN-rail Mounting
PS2 to DB-9 wiring cable,
1m
PS2 to DB-9 wiring cable,
3m
BNC to BNC wiring cable,
1m
Specifications
Analog Output
 Channels
 Resolution
 Output Rate
 Output Range
Internal Unipolar
Reference Current Loop
 Slew Rate
 Driving Capability
 Output Impedance
 Operation Modes
Digital Input/Output
 Channels
 Input Voltage
 Output Voltage
 Output Capability
General
 PICMG Compliance
 Bus Type
 I/O Connector Type
 Dimensions
 Power Consumption
 Certifications
8
16 bits
Static update
(V, software
programmable)
±10 V
0 ~ 20 mA, 4 ~ 20 mA
20 V/µs
5mA
0.1 Ω max.
Single output, synchronized
output
16, 5V/TTL
Logic 0: 0.8 V max.
Logic 1: 2.0 V min.
Logic 0: 0.5 V max. @ 24 mA
Logic 1: 2.4 V min. @ -15 mA
Sink: 0.5 V max. @ 24 mA
Source: 2.4 V min. @ -15 mA
CompactPCI V2.0, R 2.1
Hot-Swap V2.1, R 2.0
CompactPCI
68-pin SCSI-II female
160 x 100 mm (6.9" x 3.9")
with 3UBracket
Typical: 5 V @ 850, 12 V @
600 mA
CE
Ordering Information
 MIC-3723/3
 MIC-3723R/3
 PCL-10168-1
 PCL-10168-2
 ADAM-3968
3U CompactPCI 16-bit, 8-ch
non-isolated analog output
card
3U CompactPCI 16-bit, 8-ch
non-isolated analog output
card with Rear I/O support
68-pin SCSI-II cable with
male connectors on both
ends and special shielding for
noise reduction, 1 and 2 m
68-pin SCSI-II Wiring
Terminal Board for DIN-rail
mounting
Online Download www.advantech.com/products