ESP-9212_14 Datasheet, PDF (1/2 Pages) Advantech Co., Ltd. – High Performance 10/40G Top of Rack Ethernet Switch (Fiber Version)

ESP-9212
NEW
High Performance 10/40G Top of Rack
Ethernet Switch (Fiber Version)
Features
ƒƒ Built-in Intel^® Xeon^® E3-1265L v2 processor with 2x DDR3 UDIMMs
ƒƒ Broadcom StrataXGS^® Trident II BCM56854 switch solution
ƒƒ 680Gbps forwarding bandwidth
ƒƒ Fiber version support 6x QSFP and 44x SFP+
ƒƒ Redundant & Hot-swappable AC/DC PSU design
ƒƒ 4x redundant hot-swappable fan modules
ƒƒ Front-to-rear or rear-to-front cooling
ƒƒ Support Solid State Drive or Hard Disk Drive
ƒƒ Network boot nodes from the switch
ƒƒ IPMI 2.0 compliant hardware management function
ƒƒ Open IPMI compliant hardware management function
Introduction
The ESP-9212 is a new generation of switch from Advantech Networks and Communications Group and is optimized for use in software-defined networks (SDN) requiring 10 and
40 Gigabit Ethernet connectivity. It combines a high performance, low-latency Broadcom StrataXGS® Trident II BCM56854 switch for up to 680Gbps of forwarding bandwidth and a
quad-core Intel^® Xeon^® E3-1265L v2 processor, providing a powerful and flexible platform that supports enhanced features essential for top-of-the-rack deployment in modern data
center switching installations. Data center networks require increasingly denser 10GbE and 40GbE connectivity at the access and aggregation layers in order to address the higher
speed network interface cards being deployed in servers and the increased link utilization due to widespread use of virtualization.
With fiber support for six 40GbE QSFP ports and forty-four 10GbE SFP+ ports in a 1U rackmount design, the ESP-9212 can be used to build highly scalable, feature-rich, top-of-rack
switches, and aggregation equipment to connect big data, cloud and optimized workloads in the data center.
Redundant, hot swappable, AC or DC power supplies and fans, along with IPMI 2.0 and OpenIPMI hardware management interfaces provide the high availability and management
features which equip the switch for managing business-critical traffic. In addition, the front-to-rear or rear-to-front cooling capabilities of the ESP-9212 help to reduce air conditioning
costs by matching the airflow of other servers in the rack. One 10/100/1000 Ethernet RJ45 port and two serial ports are available for out-of-band management with three USB ports
available for installation and maintenance needs. Two 128GB SSD devices within the chassis provide storage for boot images allowing external network nodes to be loaded and
booted from the switch. Platform builds using a wide range of LGA-1155 processors are possible; please contact your local Advantech sales office for details.
Specifications
Processor, Memory and
Switch
Processor
Flash Memory
Max DDR3 DIMM#
Ethernet Switch
Forwarding Bandwidth
Ethernet I/O (on rear side) Fiber Version
Ethernet
Management I/O
Serial
Local Storage
System FRU
Physical
Environment
USB
SATA
Power supply
Power input
Type/Watt
System power consumption
System Fans
Dimension (W x D xH)
Weight
Operating
Storage
Intel^® Xeon^® E3-1265L v2 processor
2x 64Mbit SPI Flash
2x (8GB UDIMM)
Broadcom StrataXGS^® Trident-II BCM56854
680Gbps
44x 10GbE ZSFP+
6x 40GbE QSFP
1x GbE RJ-45
1x RJ-45 Type console port for x86
1x RJ-45 Type console port for BMC
3x USB
2x SATA devices (128GB SSD)
2x Redundant AC/DC PSU
AC 100 -240 V @ 47-63 Hz, full range
500 W 2U (1+1 redundant, 500 W each)
371 Watt Average
4x Hot-swappable redundant FAN trays
17 x 22 x 1.7 Inch (43.18 x 55.88 x 4.32 cm)
18 Kg
0 to 40° C @ 1800m and 85%RH
- 20 to 70° C @ 3000m and 95%RH
All product specifications are subject to change without notice
Last updated : 14-Oct-2013