ESP-9112_15 Datasheet, PDF (1/1 Pages) Advantech Co., Ltd. – High Performance 10/40GbE Top of Rack Network Services Switch

ESP-9112
High Performance 10/40GbE Top of Rack
Network Services Switch
NEW
Features
Hardware
ƒƒ Built-in Freescale™ T4240 QorIQ Communication Processor with three DDR3
RDIMMs
ƒƒ Broadcom StrataXGS^® Trident II BCM56854 switch solution
ƒƒ 680Gbps forwarding bandwidth
ƒƒ Supports 6x QSFP and 44x SFP+
ƒƒ Redundant & Hot-swappable DC PSU design
ƒƒ Four redundant hot-swappable fan modules
ƒƒ Rear-to-front cooling
ƒƒ Supports Solid State Drive or Hard Disk Drive
ƒƒ Network boot nodes from the switch
ƒƒ IPMI 2.0 compliant hardware management function
ƒƒ Open IPMI compliant hardware management function
Introduction
The ESP-9112 is a new generation of switch from Advantech Networks and Communications Group and is optimized for use in software-defined networks (SDN) requiring 10 and
40 Gigabit Ethernet connectivity. It combines a high performance, low-latency Broadcom StrataXGS® Trident II BCM56854 switch for up to 680Gbps of forwarding bandwidth and a
server-class Freescale QorIQ T4240 communication processor with 24-cores, providing a powerful and flexible platform that supports enhanced features essential for top-of-the-rack
deployment in modern data center switching installations. Data center networks require increasingly denser 10GbE and 40GbE connectivity at the access and aggregation layers in
order to address the higher speed network interface cards being deployed in servers and the increased link utilization due to widespread use of virtualization. The ESP-9112 combines
the performance and efficiency of a traditional network switch with the manageability, flexibility and security required for SDN.
With fiber support for six 40GbE QSFP ports and forty-four 10GbE SFP+ ports in a 1U rackmount design, the ESP-9112 can be used to build highly scalable, feature-rich, top-of-rack
switches and aggregation equipment to connect big data, cloud and optimized workloads in the data center. When enabled by VortiQa Open Network switch software, Enterprise IT
and cloud service providers will be able to drive greater flexibility and efficiency into their software defined infrastructure to support the increasing demand for new and innovative
services. The platform utilizes standards-based protocols such as OpenFlow, and supports manageability through open technologies such as OpenStack and OpenDaylight. It also
enables exceptional network security for virtualized environments by supporting the integration of high performance packet processing functions such as firewalling, intrusion detection
and IPSEC over VxLAN. It also includes VNF support, commercial grade VortiQa SDN software supporting OpenFlow version 1.3 with extensions for Layer 4 and above protocols,
and Layer 2/3 forwarding.
Redundant, hot swappable, DC power supplies and fans, along with IPMI 2.0 and OpenIPMI hardware management interfaces provide the high availability and management features
which equip the switch for managing business-critical traffic. One 10/100/1000 Ethernet RJ45 port and two serial ports are available for out-of-band management with two USB ports
available for installation and maintenance needs. One ID LED helps users identify fail equipment in short time. Two 128GB SSD devices within the chassis provide storage for boot
images allowing external network nodes to be loaded and booted from the switch.
Specifications
Hardware
Processor, Memory and
Switch
Ethernet I/O (on rear side)
Management I/O
Local Storage
System FRU
Physical
Environment
Processor
Flash Memory
Max DDR3 DIMM#
Ethernet Switch
Forwarding Bandwidth
Fiber Version
Ethernet
Serial
USB
SATA
Power supply
Power input
Type/Watt
System power consumption
System Fans
Dimension (W x D x H)
Weight
Operating
Storage
Freescale™ T4240 QorIQ 1.6GHz Communication Processor
2 x 1Gbit SPI Flash
3 x (16GB RDIMM)
Broadcom StrataXGS^® Trident-II BCM56854
680Gbps
44 x 10GbE ZSFP+
6 x 40GbE QSFP
3 x GbE RJ-45
1 x RJ-45 Type console port for T4240 QorIQ
2 x USB
2 x SATA devices (128GB SSD)
2 x Redundant DC PSU
AC 100 -240 V @ 47-63 Hz, full range
500 W 2U (1+1 redundant, 500 W each)
370 Watt Average
4 x Hot-swappable redundant FAN trays
431.8 x 558.8 x 43.2 mm (17" x 22" x 1.7")
18 kg
0 to 40° C @ 1800m and 85%RH
- 20 to 70° C @ 3000m and 95%RH
Ordering Information
Part Number
ESP-9112-F2AP0E
Description
ESP-9112 fiber version with Broadcom SDK.
44 ports 10GbE ZSFP+, 6 ports 40GbE QSFP, FreescaleTM T4240 QorIQ 1.6GHz Communication Processor and 16 GB DDR3-1333 MHz memory & 256 GB SSD
Please contact your Advantech regional sales office or email [e-mail] for additional ordering information and pricing.
All product specifications are subject to change without notice
Last updated : 27-Apr-2015