EKI-1121L Datasheet, PDF (1/1 Pages) Advantech Co., Ltd. – 1-port RISC-based Industrial Communication Controller

EKI-1121L
EKI-1122L
NEW
1-port RISC-based Industrial
Communication Controller
2-port RISC-based Industrial
Communication Controller
Features
ƒƒ ARM7 32-bit 80MHz processor
ƒƒ 8MB Flash ROM on board
ƒƒ 16MB SDRAM
ƒƒ 2 x 10/100 Mbps Ethernet ports for LAN redundancy
ƒƒ 1 or 2 software selectable RS-232/422/485 serial ports
ƒƒ 50 bps to 921.6 kbps baud rate
ƒƒ Built-in real-time clock (RTC)
ƒƒ Class I, Division 2 certification
ƒƒ Pre-installed Linux Kernel 2.4 platform
EKI-1121L
EKI-1122L
RoHS
COMPLIANT
2002/95/EC
Introduction
EKI-1121L and EKI-1122L are RISC-based embedded communication controllers which provide dual auto-sensing 10/100 Mbps Ethernet ports for network redundancy and one or
two software-selectable RS-232/422/485 serial ports. The EKI-1121L and EKI-1122L use the ARM7 RISC CPU which is a powerful computing engine to fulfill data compression or
protocol conversion requirements. The built-in 8 MB flash ROM and 16 MB SDRAM provide user enough storage to run their specific applications.
Specifications
System
ƒƒ CPU
ƒƒ Flash
ƒƒ SDRAM
ƒƒ OS (pre-installed)
ƒƒ Console Port
ƒƒ Other
Ethernet Interface
ƒƒ LAN
ƒƒ Connector
ƒƒ Protection
ARM7 32-bit RISC CPU, 80 MHz
8 MB
16 MB
uClinux
RS-232, 3-wire (Tx, Rx, GND) pin-header
RTC, watchdog timer
2 x auto-sensing 10/100 Mbps ports
RJ-45
1.5 kV magnetic isolation protection
Serial Interface
ƒƒ Serial Standards
ƒƒ Connectors
ƒƒ Protection
Serial Parameters
ƒƒ Data Bits
ƒƒ Stop Bits
ƒƒ Parity
ƒƒ Flow Control
ƒƒ Baud Rate
Serial Signals
ƒƒ RS-232
ƒƒ RS-422
ƒƒ RS-485
LEDs
ƒƒ System
ƒƒ LAN
ƒƒ Serial
Software selectable RS-232/422/485 ports
D-sub 9 male
15 kV ESD protection for all signals
5, 6, 7, 8
1, 1.5, 2
None, Even, Odd, Space, Mark
RTS/CTS, XON/XOFF, automatic RS-485 data flow
control
50 bps to 921.6 kbps
TxD, RxD, DTR, DSR, RTS, CTS, DCD, RI, GND
TxD+, TxD-, RxD+, RxD-, GND
Data+, Data-, GND
OS ready, power 1 and power 2 ready
Speed (10/100 Mbps), link/active (on connector)
TxD, RxD
Mechanics
ƒƒ Dimensions
ƒƒ Housing
ƒƒ Weight
ƒƒ Mounting
37 x 140 x 95 mm (W x H x D)
Metal
600g
DIN-rail, wall
Power Requirements
ƒƒ Input Voltage
ƒƒ Power Consumption
12 ~ 48 V_DC, redundant dual inputs
2.5 W
Software (uClinux)
ƒƒ Kernel Version
ƒƒ Protocol Stack
ƒƒ File System
ƒƒ System Utility
ƒƒ Daemon
ƒƒ Linux Tool Chain
ƒƒ uClibc
2.4.31
TCP, UDP, IPv4, ICMP, ARP, SNMP V1, HTTP, DHCP,
NTP, NFS, SMTP, Telnet, FTP, PPP, PPPoE
ROMFS/JFFS2
busybox, telnet, ftp, sash, tftp
pppd, snmpd, telnetd, inted, ftpd, boa
Arm-elf-gcc: C/C++ PC Cross Compiler
POSIX Standard Library
Environmental Limits
ƒƒ Operating Temperature 0 ~ 60° C (32 ~ 140° F)
ƒƒ Storage Temperature -20 ~ 80° C (-4 ~ 176° F)
ƒƒ Operating Humidity 5 ~ 95 % RH
Regulatory Approvals
ƒƒ EMC
CE, FCC Part 15 Subpart B (Class A)
ƒƒ Hazardous Location UL/cUL Class I, Division 2
Ordering Information
ƒƒ EKI-1121L
ƒƒ EKI-1122L
1-port RISC-based Communication Controller
2-port RISC-based Communication Controller
Online Download www.advantech.com/products