ECU-P1300 Datasheet, PDF (1/1 Pages) Advantech Co., Ltd. – Vibration Signal Modulate Card

ECU-P1706
ECU-P1702
ECU-P1300
NEW
250 KS/s, 16bit, Simultaneous 8-ch Analog
input PCI-104
10 MS/s, 12bit, Simultaneous 4-ch Analog
input PCI-104
Vibration Signal Modulate Card
Features
ƒƒ Designed for Smart-Grid Applications
ƒƒ ECU-P1706 focuses on the Vibration/ Substation Signal Analytics
(Wind-Power / Smart Substations)
ƒƒ ECU-P1702 focuses on the Partial Discharge Detection and Analytical Devices
(Smart Substations)
ƒƒ ECU-P1300 focuses on Vibration Applications
(Wind-power / Smart Substations)
ƒƒ Easy to install to ECU-1871 Energy Controller
ECU-P1706
Specifications
General
ƒƒ Power Consumption Typical: 5V @ 850mA
ƒƒ Bus Type
PCI-104
ƒƒ I/O Connector
Plug-in Terminal Block
ƒƒ Operating
-20 ~ 70°C (-4 ~158°F)
Temperature
@ 5 ~ 85% RH
ƒƒ Storage Temperature -40 ~ 80°C (-40 ~176°F)
ƒƒ Storage Humidity 5 ~ 95% RH,
non-condensing
(IEC 60068-2-3)
Analog Input
ƒƒ Channels
8 differential
ƒƒ Resolution
16 bits
ƒƒ Max. Sampling Rate 250 KS/s
ƒƒ FIFO Size
8K samples
ƒƒ Overvoltage
±30V
Protection
ƒƒ Input Impedance 18MΩ
ƒƒ Sampling Mode Software, onboard
programmable pacer and
external (TTL Level)
ƒƒ Trigger mode
Delay To Start Trigger,
Delay To Stop Trigger
ƒƒ Trigger Source
Analog Trigger, External
Trigger
ƒƒ Input Range
(V. Software Programmable)
Bipolar
Accuracy
% of FSR±1LSB
±10V ±5V
0.04 0.04
±2.5V ±1.25V
0.06 0.08
Timer Counter
ƒƒ Channels
2
ƒƒ Resolution
32 bits
ƒƒ Mode
In: Event counting,
Frequency In, PWM In
ƒƒ Compatibility
Isolated 24VDC
ƒƒ Max. Input Frequency 1 MHz
ƒƒ Max. Output Frequency 1 MHz
Ordering Information
ƒƒ ECU-P1706-AE
250 KS/s, 16bit,
Simultaneous 8-ch
PCI-104
All product specifications are subject to change without notice
ECU-P1702
Specifications
General
ƒƒ Power Consumption 5V @ 700mA (Max.)
3.3V @ 850mA (Max.)
ƒƒ Bus Type
PCI-104
ƒƒ I/O Connector
BNC
ƒƒ Operating
Temperature
-20 ~ 70°C (-4 ~158°F)
@ 5 ~ 85% RH
ƒƒ Storage Temperature -40 ~ 80°C (-40 ~176°F)
ƒƒ Storage Humidity
5 ~ 95% RH,
non-condensing
(IEC 60068-2-3)
Analog Input
ƒƒ Channels
4 Single-ended
ƒƒ Resolution
12 bits
ƒƒ Max. Sampling Rate 10 MS/s
ƒƒ FIFO Size
32K samples
ƒƒ Overvoltage
±15V
Protection
ƒƒ Input Impedance
50 ohm/1M ohm/Hi Z
switch selectable
ƒƒ Sampling Mode
Software, onboard
programmable pacer and
external (TTL Level)
ƒƒ Trigger mode
Delay To Start Trigger,
Delay To Stop Trigger
ƒƒ Trigger Source
Analog Trigger, External
Trigger
ƒƒ Input Range
±5V, ±2.5V, ±1V, ±0.5V
Ordering Information
ƒƒ ECU-P1702-LAE
10 MS/s, 12bit,
Simultaneous
4-ch PCI-104
ECU-P1300
Specifications
General
ƒƒ Power Consumption Typical: 5V @ 700mA;
12V @ 100mA
ƒƒ Operating
Temperature
-20 ~ 70°C (-4 ~158°F)
@ 5 ~ 85% RH
ƒƒ Storage Temperature -40 ~ 80°C (-40 ~176°F)
ƒƒ Storage Humidity
5 ~ 95% RH,
non-condensing
(IEC 60068-2-3)
Vibration Modulate
ƒƒ Channels
ƒƒ Input Range
ƒƒ Output Range
ƒƒ Input Coupling
ƒƒ Sensor Current
Supply
ƒƒ Precision
ƒƒ Drive Ability
ƒƒ Sensor Signal Gain
ƒƒ Signal Gain
ƒƒ Analog Filter
ƒƒ Filter Adjustable
8
±5V (Max.)
±10V
AC
4mA ±1%, 24V compliant
0.1%
0 ~ 5K
1
1
8th order Lowpass Bessel
Filters
0.1 Hz ~ 25KHz Adjustable
by Software Program
Ordering Information
ƒƒ ECU-P1300-AE
Vibration Signal Modulate
Card
Online Download www.advantech.com/products
Last updated : 5-May-2015