ECU-1911_15 Datasheet, PDF (1/1 Pages) Advantech Co., Ltd. – Xscale @ PXA-270 520 MHz RTU with 8-ch 16-bit AI,32-ch DI,32-ch DO

ECU-1911
NEW
Xscale @ PXA-270 520 MHz RTU with
8-ch 16-bit AI,32-ch DI,32-ch DO
Features
ƒƒ Onboard Xscale @ PXA-270 520 MHz CPU
ƒƒ 1 x RS-232 port
ƒƒ 3 x RS-485 isolated ports
ƒƒ 2 x 10/100Base-T RJ-45 ports
ƒƒ 8-ch 16-bit differential Analog Input
ƒƒ 32-ch isolated Digital Input
ƒƒ 32-ch isolated Digital Output
ƒƒ Built-in Window CE 5.0
Introduction
The ECU-1911 focuses on RTU monitor application. The ECU-1911 is also a standalone RTU that provides a 16-bit 8-ch A/D converter, 32-ch Relay and 32-ch Digital Input. This
controller also supports four serial communication ports and two networking interfaces. You can seamlessly integrate your applications into the ECU-1911 and speed up your system
development with this application ready RTU.
Specifications
General
ƒƒ Power Consumption
ƒƒ Power Requirements
ƒƒ OS Support
<10 W (Typical)
24 VDC (Typical) (10 VDC Min ~ 30 VDC Max)
Windows CE 5.0
System Hardware
ƒƒ CPU
ƒƒ Memory
ƒƒ Storage
ƒƒ Display
Xscale @ PXA-270 520MHz
Onboard 64 MB SDRAM/ 32 MB Flash
1 x type I/II Compact Flash slot
VGA 640 x480 @ 60Hz
Digital Input
ƒƒ Channels
ƒƒ I/O Type
ƒƒ Wet Contact
ƒƒ Isolation
ƒƒ Connector
32
Sink
Logic 0: 0 ~ 10 V
Logic 1: 19 ~ 30 V
3000 VDC
Terminal Block (#14 ~ 22 AWG)
Digital Output
ƒƒ Channels
ƒƒ I/O Type
ƒƒ Contact Rating
ƒƒ Isolation
ƒƒ Connector
32
Power Relay Form A
AC: 5A @ 250 V; DC: 30 V @ 5 A (Resistive Load)
500 VDC
Terminal Block (#14 ~ 22 AWG)
Analog Input
ƒƒ Channels
ƒƒ Resolution
ƒƒ Sampling rate
ƒƒ Input Impedance
ƒƒ Input Range
ƒƒ Accuray
ƒƒ Span Drift
ƒƒ Zero Drift
8 differential
16 bits
10 Hz/sec (total)
700 kΩ
0 ~ 150 mV, 0 ~ 500 mV, 0 ~ 1 V, 0 ~ 5 V, 0 ~ 10 V,
0 ~ 15 V, ±150 mV, ±500mV, ±1 V, ±5 V, ±10 V,
±15 V, ±20 mA, 4 ~ 20 mA
Voltage : ± 0.1 %
Current : ± 0.2 %
±25 ppm/°C
±6 μV/°C
Environment
ƒƒ Storage Humidity
5 ~ 95% @ 40°C (non-condensing)
ƒƒ Operating Temperature -20 ~ 70°C (-4 ~158°F) @ 5 ~ 85% RH
ƒƒ Storage Temperature -40 ~ 80°C (-40 ~176°F)
I/O Interface
ƒƒ Serial Ports
ƒƒ LAN
ƒƒ USB Port
1 x RS-232, 3 x RS-485 (Automatic RS-485 data flow)
2 x 10/100Base-T RJ-45 ports
1 x USB, OpenHCI, Rev. 1.1 compliant
Ordering Information
ƒƒ ECU-1911-R0CAE
Xscale @ PXA-270 520 MHz RTU with 8-ch 16-bit
Analog Input, 32-ch Digital Input, and 32-ch Digital
Output
Power & Energy Automation
All product specifications are subject to change without notice
Last updated : 5-May-2015