DSP-8901_14 Datasheet, PDF (1/2 Pages) Advantech Co., Ltd. – AdvancedTCA DSP Blade Provides Industrys Most Powerful DSP Farm for Voice and Video Processing

DSP-8901
NEW
AdvancedTCA^® DSP Blade
Provides Industry's Most Powerful
DSP Farm for Voice and Video Processing
Features
ƒƒ Twenty Texas Instruments TMS320C6678 DSPs
ƒƒ 512 MB ~ 2 GB DDR3 memory per DSP
ƒƒ BCM56321 10 GbE switch for both Fabric Interface and Base Interface
ƒƒ Freescale QorIQ™ P2020 for Local Management Processor (LMP)
ƒƒ IDT Tsi577 Serial RapidIO switches
ƒƒ Pigeon Point System IPMI 2.0
ƒƒ Wind River Linux PNE-LE 4.0 support for P2020
ƒƒ Single slot PICMG 3.0/ 3.1 compliant
Introduction
The DSP-8901 is designed with 20 TI TMS320C6678 DSPs. With its twenty onboard TMS320C6678 DSPs at 1.0 GHz core frequency, the DSP-8901 provides 160 cores of processing
power to reach the higher levels of performance density needed to build the highest capacity wireless media gateways. The DSP-8901 significantly reduces overall system power
dissipation and system cost, and frees up valuable slots in gateway elements for additional subscriber capacity and throughput. The DSP-8901 includes a high-performance Freescale
QorIQ P2020 processor. The powerful Broadcom BCM56321 switch terminates the 10 gigabit Ethernet fabric connections and distributes traffic to the twenty DSPs. The DSP-8901
offers unrivaled packet and media processing capabilities.
For increasing demand in high end video conferencing, broadcasting and telepresence fields, the DSP-8901 ATCA blade also offers unrivaled image processing performance for
compression and decompression, image analysis, filtering and format conversion.
Specifications
DSP Farm
Zone 2
Serial RapidIO
Local Management Processor (LMP)
DSP
Number of DSPs
Speed of DSP
Cores per DSP
DDR3 Memory per DSP
Interface
Fabric Interface/Base Interface
Serial RapidIO Switch
Processor
E500 Core Frequency
DDR3 Memory
Interface
Front I/O Interface
Front LEDs
Power
Cooling
Software Support
Physical Characteristics
Environment
Compliance
Boot Flash
Local Bus
Console Port
USB Port
Ethernet Management Port
DSP Status
Health Status
Out of Service
ATCA Hot Swap
Watt
Heatsink
Boot Loader
H/W Management
Operating System
Dimensions (W x D)
Weight
Operating Environment
Storage Temperature
EMC/Safety
PICMG
DSP Processing Platforms
All product specifications are subject to change without notice
TI TMS320C6678
20
1.0 GHz
8 x TMS320C66x DSP @ 1.0 GHz
512 MB ~ 2 GB
Serial RapidIO interface
1000 Mbps Ethernet with SGMII
1 x Broadcom BCM56321 10 GbE switch
2 x 10 GbE XAUI for fabric interface
2 x 1000 Mbps for base interface
2 x Tundra/IDT Tsi577 (16-port 3.125 Gb Serial RapidIO switch)
1 x Freescale QorIQ P2020
Up to 1.2 GHz
2 GB, 1 x 128 M*8 1 G 1333 MHz (ECC)
Serial RapidIO interface
10/100/1000Mbps Ethernet interfaces
PCIe interface
USB 2.0 interface
Dual boot flashes (redundancy)
Redundant pair of 128 MB
1 x NAND Flash up to 1 GB
1 x RJ-45 (UART)
1 x Type A
1 x RJ-45
Per DSP Dual Color RED/GREEN DSP status (20 total LEDs)
Green
Red/Yellow
Blue
Max. 350 W
Passive Aluminum Cooler
U-Boot
Compliant with Pigeon Point System IPMI 2.0
WindRiver Linux PNE-LE 4.0/Freescale SDK
322.25 x 294.56 mm (12.69" x 11.60")
3 kg
Temperature: 0 to 45° C, Humidity: 20% to 90 % RH
Temperature: -20 to 70° C, Humidity: 5% to 95 % RH
CE mark (EN60950-2001)
UL60950-1/CSAC22.2
FCC47 CFR Part15, Class A 55022/EN55024/EN300386
3.0/3.1
Last updated : 25-Dec-2014