DMU-5010_14 Datasheet, PDF (1/1 Pages) Advantech Co., Ltd. – 12-ch DI/O, 4-ch AI, 4-ch RTD Modbus TCP Module

DMU-5010
NEW
12-ch DI/O, 4-ch AI, 4-ch
RTD Modbus TCP Module
Features
ƒƒ Ethernet-based I/O
ƒƒ Mixed I/O in single module
ƒƒ Active I/O message by data stream
ƒƒ Industrial Modbus/TCP protocol
ƒƒ Easily update firmware through Ethernet
ƒƒ Support burn-out detection
ƒƒ Support Ethernet Daisy Chain
ƒƒ Wide operating temperature range
ƒƒ High anti-interference performance
RoHS
COMPLIANT
2002/95/EC
Introduction
DMU-5010 is an Ethernet I/O module that supports Modbus TCP protocol and Ethernet daisy chain. DMU-5010 delivers various onboard I/Os including analog input, digital input,
and digital output, providing flexible options to satisfy versatile application requirements. With high anti-interference performance, DMU-5010 is suitable for harsh environment
applications. You can easily configure the module by the Advantech Domain Focused Configuration Tool.
Specifications
General
ƒƒ Enclosure
ƒƒ Mounting
ƒƒ Dimensions (WxHxD)
ƒƒ LAN
ƒƒ Connector
ƒƒ Watchdog
ƒƒ Supported Protocols
ƒƒ Power Input
ƒƒ Power Consumption
Analog Input
ƒƒ Channels
ƒƒ Input Type
ƒƒ Input Range
ƒƒ RTD Types & Temp Range
ƒƒ Input Impedance
ƒƒ Accuracy
ƒƒ Span Drift
ƒƒ Zero Drift
ƒƒ Resolution
ƒƒ Sampling Rate
ƒƒ Burn-out Detection
SECC
DIN-rail,Wallmount
43 x 125 x 105 mm (1.69" x 4.92" x 4.13")
10/100Base-T
1x40 Plug-in screw terminal block (#14~22
AWG)(Power and I/O)
2 x RJ-45(LAN)
System (1.6 second) and Communication
(programmable)
Modbus/TCP
Unregulated10-30VDC w/power reversal
protection
7.2W@ 24VDC
8
mV, V, mA(Ch0-Ch3), mV, V, mA, RTD
(Ch4-Ch7)
0~5V,0~10V, 0~15V, ±5V, ±10V, ±15V, ±20mA,
0~20mA, 4~20mA
Pt 100 (2-wire and 3-wire):
-50 ~150°C
0 ~ 100°C
0 ~ 200°C
0 ~ 400°C
-200 ~ 200°C
IEC RTD 100 ohms ( =0.0385 )
JIS RTD 100 ohms ( =0.0392 )
Pt-1000(2-wire and 3-wire): -40°C ~160°C
Voltage: >10MΩ; Current:120Ω
±0.1%, (voltage); ±0.2% (current); ±0.2°C
(RTD) or better
±68 ppm/°C (Voltage)
±6 μV/°C (Voltage)
16-bit
10 samples/second
4~20mA and RTD
Power & Energy Automation
All product specifications are subject to change without notice
ƒƒ Protection
Digital Input /Output
50/60 Hz Noise rejection
2,500 VDC Isolation
±30VDC Overvoltage
ƒƒ Channels:
8-ch DI
4-ch DI/DO shared (DIO0~DIO3 can be set as DI/DO
by Utillity)
Digital Input
ƒƒ Input Level
Dry contact:
Logic level 0 (Off): open

Logic level 1 (On): close to GND
Wet contact:
Logic level 0 (Off): +10V to +30V

Logic level 1(On): +3V max
Note: The Digital Input Level 0 and 1 status can be
inverted by utility
ƒƒ Supports 200Hz Frequency/counter input
2 channels max
Counter (32 bit) 200Hz
Frequency 0.1Hz~200Hz
ƒƒ Supports Digital Noise filter
ƒƒ Isolation Protection 2500 VDC
Digital Output
ƒƒ Output
Open Collector to 30V
30mA max load.
ƒƒ Power Dissipation 300mW for each channel
ƒƒ PWM Period
2ms~3600sec
ƒƒ PWM Minimum Duty On 0.2ms
ƒƒ Isolation Protection 2500 VDC
Environment
ƒƒ Storage Humidity
5-95% RH
ƒƒ Operation Temperature -20 ~ 70°C (-4 ~ 158°F)
ƒƒ Storage Temperature -30 ~ 80°C (-22 ~ 176°F)
Ordering Information
ƒƒ DMU-5010-AE
8-ch DI. 4-ch DO, 8-ch AI, 4-ch RTD Modbus TCP
Module
Last updated : 25-Mar-2014