DMU-3010_15 Datasheet, PDF (1/1 Pages) Advantech Co., Ltd. – 8-ch AI, 8-ch DI, 4-ch DO Ethernet I/O Module

DMU-3010
8-ch AI, 8-ch DI, 4-ch DO Ethernet I/O
Module
Features
ƒƒ Industrial Modbus/TCP protocol
ƒƒ Mixed I/O in the Module
ƒƒ Advantech Domain Focused Configuration Tool
ƒƒ Remote maintenance through Ethernet
ƒƒ Supports online device auto-scan or manual configure function
ƒƒ Auto push data to specification target function
ƒƒ Supports High/Low Alarm function
ƒƒ Supports cable burn-out check
ƒƒ Supports pulse/ accumulator input
RoHS
COMPLIANT
2002/95/EC
Introduction
The DMU-3010 is an Ethernet I/O module that supports the Modbus TCP protocol, and delivers various onboard I/Os including analog input, digital input, and digital output, providing
flexible options to satisfy versatile application requirements. It also features the powerful Advantech Domain Focused Configuration Tool for engineers to quickly develop their applications.
Specifications
General
ƒƒ Dimensions (W x H x D) 120 x 120 x 44 mm (4.72" x 4.72" x 1.73")
ƒƒ LAN
10/100Base-T
ƒƒ Connector
1 x RJ-45 (LAN)
4 x Plug-in screw terminal block (I/O & Power)
ƒƒ Watchdog
System (1.6 sec)
ƒƒ Supported Protocols Modbus/TCP
ƒƒ Power Input
10 ~ 30 VDC
ƒƒ Power Consumption 3 W @ 24 VDC
Analog Input
ƒƒ Channels
8
ƒƒ Input Type
V, mA*1, RTD*2
ƒƒ Voltage Range
ƒƒ Current Range
0 ~ 10 V
0 ~ 20 mA, 4 ~ 20 mA
ƒƒ RTD Type
Pt 100 (3-wire): -50 ~ 150°C
0 ~ 100°C
0 ~ 200°C
0 ~ 400°C
-50 ~ 200°C
Pt 1000 (3-wire): -40 ~ 160°C
IEC RTD 100 ohms (=0.0385)
JIS RTD 100 ohms (=0.0392)
ƒƒ Input Impedance
2 MΩ (voltage)
ƒƒ Accuracy
±0.1%, (voltage); ±0.2% (current); ±0.5°C (RTD); or
Better
ƒƒ Span Drift
±25 ppm/°C
ƒƒ Zero Drift
±6 μV/°C
ƒƒ Resolution
16-bit
ƒƒ Sampling Rate
10 samples/second
ƒƒ CMR @ 50/60 Hz
90 dB
ƒƒ NMR @ 50/60 Hz
60 dB
ƒƒ Over Voltage Protection ±35 VDC
ƒƒ Built-in TVS/ESD Protection
ƒƒ Isolation Protection
2500 VDC
Channels 0~7 support V, mA
Channel 4~7 also support RTD input
Digital Input
ƒƒ Channels
8
ƒƒ Dry Contact
Logic level 0: Open
Logic level 1: Close to Ground
ƒƒ Supports 200 Hz pulse/accumulator input
ƒƒ Isolation Protection 2500 VDC
Digital Output
ƒƒ Channels
4
Open Collector to 30V
30mA max load.
ƒƒ Power Dissipation 300 mW for each channel
ƒƒ PWM Period
20 ms ~ 3600 sec
ƒƒ PWM Minimum Duty On 2 ms
ƒƒ Isolation Protection 2500 VDC
Environment
ƒƒ Humidity
5 ~ 95% RH
ƒƒ Operation Temperature -40 ~ 70°C (-40 ~ 158°F)
ƒƒ Storage Temperature -40 ~ 70°C (-40 ~ 158°F)
Ordering Information
ƒƒ DMU-3010-AE
8-ch AI,8-ch DI,4-ch DO Ethernet IO Module
Power & Energy Automation
All product specifications are subject to change without notice
Last updated : 5-May-2015