AMAX-2752SY_14 Datasheet, PDF (1/1 Pages) Advantech Co., Ltd. – 32-ch Isolated Digital Input/Output Slave Modules

32-ch Isolated Digital
AMAX-2750SY Series Input/Output Slave
Modules
Features
ƒƒ Max. 20 Mbps transfer rate
ƒƒ Onboard terminal for direct wiring
ƒƒ Easy installation with RJ45 phone jack and LED diagnostic
ƒƒ LED indicator for each IO channel (switch by SW4)
ƒƒ Selection of I/O-channel configuration (32-ch DI, 32-ch DO or 16/16-ch
Digital I/O)
ƒƒ 2,500 VRMS Isolation voltage
ƒƒ Suitable for DIN-rail mounting
AMAX-2752SY
AMAX-2754SY
AMAX-2756SY
RoHS
COMPLIANT
2002/95/EC
Introduction
The AMAX-2750SY series consists of digital slave modules for AMONet RS-485 that extend the digital I/O capacity. All the digital I/O slave extension modules are connected serially
with a simple Cat.5 cable. This reduces wiring between driver and controller and is very suitable for highly integrated machine automation applications. High speed, scalability and
cost-effectiveness ensures a solid solution for machine builders. There are 3 main types of digital I/O slave modules, 32-ch digital input, 32-ch digital output, and 16/16-ch digital
input/output. With these slave modules, you can connect actuators/sensors directly with minimum hassle. You can access I/O points nearby or 100 meters away using simple and
low-cost wiring, and the high speed of AMONet RS-485 makes it possible to scan 2,048 I/O channels in 1.04 ms.
Specifications
Isolated Digital Input
ƒƒ Channels
AMAX-2752SY: 32 (4 ports)
AMAX-2756SY: 16 (2 ports)
ƒƒ Input Type
Dry contact
ƒƒ Isolation Protection 2,500 VRMS
ƒƒ Opto-Isolator Response 18 μs
ƒƒ Input Resistance
1 kW @ 0.5 W
Isolated Digital Output
ƒƒ Channels
AMAX-2754SY: 32 (4 ports)
AMAX-2756SY: 16 (2 ports)
ƒƒ Output Type
Sink (NPN) (open collector Darlington transistors)
ƒƒ Isolation Protection
ƒƒ Output Voltage
ƒƒ Sink Current
2,500 VRMS
10 ~ 30 VDC
150 mA/ea. for multiple-channel usage,
total 1.1 A max. (1 port)
General
ƒƒ Bus Type
AMONet RS-485
ƒƒ Certification
CE, FCC Class A
ƒƒ Connectors
2 x RJ45 and 2 x 40-pin wiring board
ƒƒ Dimensions (L x W x H) 125 x 47.6 x 151 mm (4.9" x 1.8" x 5.9")
ƒƒ Power Consumption AMAX-2752SY: 1.2 W typical, 5 W max.
AMAX-2754SY: 1.2 W typical, 5 W max.
AMAX-2756SY: 1.2 W typical, 5 W max.
ƒƒ Power Input
24 VDC within 200 mA ripple
ƒƒ Power Supply for DIO 10 ~ 30 VDC (Current < 2A)
ƒƒ Humidity
5 ~ 95% RH, non-condensing (IEC 60068-2-3)
ƒƒ Operating Temperature 0 ~ 60°C (32 ~ 140°F)
Ordering Information
ƒƒ AMAX-2752SY-AE
ƒƒ AMAX-2754SY-AE
ƒƒ AMAX-2756SY-AE
32-ch Isolated Digital Input AMONet Module
32-ch Isolated Digital Output AMONet Module
16/16-ch Isolated Digital I/O AMONet Module
Motion Control
All product specifications are subject to change without notice
Last updated : 19-Mar-2014