|
AMAX-2752SY Datasheet, PDF (1/2 Pages) Advantech Co., Ltd. – 32-ch Isolated Digital Input/Output Slave Modules | |||
|
32-ch Isolated Digital
AMAX-2750SY Series Input/Output Slave
Modules
Features
ï§ Max. 20 Mbps transfer rate
ï§ Onboard terminal for direct wiring
ï§ Easy installation with RJ45 phone jack and LED diagnostic
ï§ LED indicator for each IO channel (switch by SW4)
ï§ Selection of I/O-channel configuration (32-ch DI, 32-ch DO or 16/16-ch
Digital I/O)
ï§ 2,500 Vrms Isolation voltage
ï§ Suitable for DIN-rail mounting
AMAX-2752SY
AMAX-2754SY
AMAX-2756SY
RoHS
COMPLIANT
2002/95/EC
Introduction
The AMAX-2750SY series consists of digital slave modules for AMONet RS-485 that extend the digital I/O capacity. All the digital I/O slave extension modules are connected serially
with a simple Cat.5 cable. This reduces wiring between driver and controller and is very suitable for highly integrated machine automation applications. High speed, scalability and
cost-effectiveness ensures a solid solution for machine builders.
There are 3 main types of digital I/O slave modules, 32-ch digital input, 32-ch digital output, and 16/16-ch digital input/output. With these slave modules, you can connect actuators/
sensors directly with minimum hassle. You can access I/O points nearby or 100 meters away using simple and low-cost wiring, and the high speed of AMONet RS-485 makes it
possible to scan 2048 I/O channels in 1.04 ms.
Specifications
Isolated Digital Input
ï§ Channels
AMAX-2752SY: 32 (4 ports)
AMAX-2756SY: 16 (2 ports)
ï§ Input Type
Dry contact
ï§ Isolation Protection 2,500 VRMS
ï§ Opto-Isolator Response 18 μs
ï§ Input Resistance
1 kW @ 0.5 W
Isolated Digital Output
ï§ Channels
AMAX-2754SY: 32 (4 ports)
AMAX-2756SY: 16 (2 ports)
ï§ Output Type
Sink (NPN) (open collector Darlington transistors)
ï§ Isolation Protection
ï§ Output Voltage
ï§ Sink Current
2,500 VRMS
10 ~ 30 VDC
1CH: 500 mA (1 port)
150 mA/ea. for multiple-channel usage, total 1.1A max.
General
ï§ Bus Type
AMONet RS-485
ï§ Certifications
CE
ï§ Connectors
2 x RJ45 and 2 x 40-pin wiring board
ï§ Dimensions (L x W x H) 125 x 47.6 x 151 mm (4.9" x 1.8" x 5.9")
ï§ Power Consumption
AMAX-2752SY: 1.2 W typical, 13 W max.
AMAX-2754SY: 1.2 W typical, 5 W max.
AMAX-2756SY: 1.2 W typical, 8 W max.
ï§ Power Input
ï§ Power Supply for DIO
ï§ Humidity
24 VDC within 200 mA ripple
10 ~ 30 VDC (Current < 2A)
5 ~ 95% RH, non-condensing (IEC 68-2-3)
ï§ Operating Temperature 0 ~ 60° C (32 ~ 140° F)
Ordering Information
ï§ AMAX-2752SY
ï§ AMAX-2754SY
ï§ AMAX-2756SY
32-ch Isolated Digital Input AMONet Module
32-ch Isolated Digital Output AMONet Module
16/16-ch Isolated Digital I/O AMONet Module
Motion Control I/O Modules
|
▷ |