ADAM-5202 Datasheet, PDF (1/1 Pages) Advantech Co., Ltd. – 2-port AMONet Master Module 4-axis Stepping/Pulse-type Servo Motor Control Module

ADAM-5202
ADAM-5240
ADAM-5030
NEW
NEW
2-port AMONet Master Module
4-axis Stepping/Pulse-type Servo
Motor Control Module
2-slot SD Storage Module
NEW
ADAM-5202
RoHS
COMPLIANT
2002/95/EC
ADAM-5240
RoHS
COMPLIANT
2002/95/EC
ADAM-5030
RoHS
COMPLIANT
2002/95/EC
Specifications
Specifications
Specifications
General
 Certifications
CE
 Power Consumption 0.5 W (Max.)
 Connectors
RJ-45
 LED Indictors
Active, Error (Each Port)
 Number of Rings 2
 Transmission Speed 2.5, 5, 10 or 20 Mbps with
automatic data flow control
 Serial Interface
Half duplex RS-485 with
transformer isolation
 Cable Type
CAT5 UTP/STP Ethernet
cable
 Surge Protection 10 kV
 Communication
Max. 100 m (20 Mbps/32
slave modules) or 50 m (20
Mbps/64 slave modules)
Distance
 Communication
Slave
2 Rings with Max. 128
(1 Ring with 64 slaves)
Module Number
 Operating
Temperature
0 ~ 50° C (32 ~ 122° F)
Note: only for ADAM-5550 Series
Ordering Information
 ADAM-5202
2-ring AMONet Master
Module
General
 Certifications
 Power Consumption
 Connectors
 Operating Temperature
 Relative Humidity
CE
1.1 W (Max.)
100-pin SCSI-II female
0 ~ 60° C (32 ~ 140° F)
5 ~ 95 % RH non-condensing
(refer to IEC 68-2-3)
Motion
 Number of Axis
 External Power input
 Range
 Speed
4 Axis
DC +12 ~ 24 Vdc
2/3-axis Linear Interpolation/2-
axis Circular Interpolation
±2, 147, 483, 646 for each axis
1PPS ~ 4MPPS
Continuous Interpolation
 Speed
1PPS ~ 2MPPS
Drive Output Pulses
 Range
 Pulse Output Type
 Speed Curve
1PPS ~ 4MPPS
Pulse /Direction
(1-pulse, 1- direction type)
Up/Down (2-pulse type)
T/S-curve Acceleration/
Deceleration
Input Pulse for Encoder Interface
 Encoder Pulse Input Type Quadrature (A/B phase or
Up/Down)
 Counts per Encoder Cycle X1, X2 ,X4 (A/B phase only)
 Protection
1,000 Vdc isolation
 Input Range
5 V ~ 30 V
External Signals Driving
 Input Signal
 Max Input Frequency
 Protection
nEXOP + and nEXOP
100 Hz
1,000 Vdc Photo coupler isolation
External Deceleration/Instantaneous Stop Signal
 Input Signal
nIN1 ~ 3
 Max Input Frequency 4 kHz
 Protection
1,000 Vdc Photo coupler isolation
Input Pulse for Servo Motor Drives
 Input Signal
nALArm (servo alarm)
nINPOS (position command
completed)
General Purpose Output Signal
 Ouput Signal
nOUT4 ~ 7
Emergency Stop
 Input Signal
EMG – one emergency stop input
for ADAM-5240
 Protection
1000 Vdc Photo coupler isolation
and RC filtering
Note: only for ADAM-5550 Series
Ordering Information
 ADAM-5240
4-axis Stepping/Pulse Servo
Motor Control Module
General
 Certification
CE
 Power Consumption 0.5 W (Max)
 Storage Type
SD (Secure Digital Card)
 Storage Number 2
 USB Type
USB Rev 2.0 (Compliant)
 USB Number
2
 Operating
Temperature
0 ~ 55° C (32 ~ 131° F)
 Max Storage
1 GB x 2
 Format
FAT-16
 Interface
PCI Bus
Note: only for ADAM-5550 Series
Ordering Information
 ADAM-5030
2-slot SD Storage Module
PC-based Controllers & I/O Modules