ADAM-5000L Datasheet, PDF (1/2 Pages) Advantech Co., Ltd. – 4-slot Ethernet-based Distributed DA&C System

ADAM-5000L/TCP 4-slot Ethernet-based Distributed
DA&C System
ADAM-5000/TCP 8-slot Ethernet-based Distributed
DA&C System
ADAM-5000/TCP
ADAM-5000L/TCP
Features
 ARM 32-bit RISC CPU
 10/100Base-T auto-negotiation high-speed communication port
 Supports Modbus/TCP for easy integration
 Supports UDP event handling function
 Up to 100 m communication distance w/o repeater
 Allows remote configuration via Ethernet
 Allows concurrent access for 8 host PCs
 4 I/O slots for up to 64 points and 8 I/O slots for up to 128 points data
monitoring and control
 1500 V_DC isolation for Ethernet communication
 Built-in watchdog timer for system auto-reset
 Windows utility
- I/O modules configuration and calibration
- Network auto searching
- Data stream setting
- Current status monitoring and alarm trigger
 Provides .NET Class LIB to develop applications
Introduction
ADAM-5000L/TCP and ADAM-5000/TPC are both Ethernet-based I/O systems. Without a repeater, ADAM-5000L/TCP and ADAM-5000/TCP can cover a communication distance up
to 100 m. This allows remote configuration via Ethernet and eight PCs can simultaneously access the data. The ADAM-5000L/TCP and ADAM-5000/TCP are the solutions for easy
configuration and efficient management. An ideal and cost-effective solution for eAutomation architecture.
Specifications
Control System
 CPU
 I/O Slots
 Memory
 Operating System
 LED Indicators
32-bit ARM RISC
ADAM-5000L/TCP: 4
ADAM-5000/TCP: 8
Flash ROM: 512 KB
RAM: 4 MB
Real-time OS
Power (3.3 V, 5 V)
CPU
Communication (Link, Active, 10/100 Mbps, Tx, Rx)
Battery
Communications (Ethernet)
 Comm. Distance
 Comm. Protocol
 Data Transfer Rate
 Event Response Time
 Interface
 Wiring
100 meters w/o repeater
Modbus/TCP, TCP, UDP, IP, ARP
Up to 100 Mbps
< 5 ms
1 x 10/100Base-T (RJ-45)
UTP, category 5 or greater
Communications (Serial)
 Comm. Distance
 Comm. Protocol
 Data Transfer Rate
 Interface
 Max. Nodes
RS-485: 1.2 km (4000 feet)
RS-232: 15 m
Modbus/RTU
Up to 115.2 kbps
1 x DB9-M for RS-485
1 x DB9-F for RS-485
1 x DB9-F for RS-232
12 (in RS-485 daisy-chain network for Remote I/O
connection)
Power
 Power Consumption
4.0 W @ 24 Vdc (ADAM-5000L/TCP)
(not including I/O modules)
5.0 W @ 24 Vdc (ADAM-5000/TCP)
(not including I/O modules)
 Power Input
Unregulated 10 ~ 30 VDC
Software
 .NET Class LIB
 Windows Utility
Network setting, I/O configuration & calibration, data
stream, alarm setting
 Modbus/TCP OPC Server
Protection
 Communication Line 3000 VDC
Isolation
 I/O Module Isolation 3000 V_DC
 LAN Communication 1500 V_DC
 Overvoltage Protection Yes
 Power Reversal
Yes
Protection
General
 Certifications
CE, FCC class A
 Connectors
1 x DB9-M/DB9-F/screw terminal for RS-485
(communication)
1 x DB9-F for RS-232 (internal use)
1 x Screw-terminal for power input
1 x RJ-45 for LAN
 Dimensions (W x H x D) ADAM-5000L/TPC: 231 x 110 x 75 mm
ADAM-5000/TCP: 355 x 110 x 75 mm
 Enclosure
ABS+PC
 Mounting
DIN 35 rail, wall
Environment
 Humidity
5 ~ 95%, non-condensing
 Operating Temperature - 10 ~ 70° C (14 ~ 158° F)
 Storage Temperature - 25 ~ 85° C (-13 ~ 185° F)
Ordering Information
 ADAM-5000L/TCP
 ADAM-5000/TCP
4-slot Ethernet-based Distributed DA&C System
8-slot Ethernet-based Distributed DA&C System
Programmable Automation Controllers & Software