ADAM-5000 Datasheet, PDF (1/2 Pages) Advantech Co., Ltd. – Distributed DA&C System Based on RS-485

ADAM-5000/485
ADAM-5000E
Distributed DA&C System
Based on RS-485
Features
 RS-485 Communication for easy installation and networking
 4 or 8 slots for up to 128 points data monitoning card control in one
module
 Extensive Software support, inclucles windows DLL drivers, OCX drivers,
OPC server and popular HMI/SCAPA Software driver.
 Seamlessly inteqrated with easy-to-use ADAMView data acquisition
Software.
Introduction
The ADAM-5000/485 and ADAM-5000E systems use the EIA RS-485 communication protocol. This is the industry's most widely used, balanced, bidirectional transmission line
standard. The RS-485 was specifically developed for industrial applications to transmit and receive data at high rates over long distances.
Processor
 CPU
 I/O module capacity
 Watchdog Timer
 Power Consumption
16-bit microprocessor
4 or 8
Yes
1.0 W (ADAM-5000/485)
4.0 W (ADAM-5000E)
Isolation
 Communication
2500 V_DC (ADAM-5000/485)
Isolation
3000 V_DC (ADAM-5000E)
 Communication Power 3000 V_DC
Isolation
 I/O Module Isolation 3000 V_DC
Diagnosis
 Status Display
 Self-test
 Software Diagnosis
Power, CPU, communication
Yes, while on
Yes
Communication
 Network
 Speeds (bps)
 Max. Communication
Distance
 Command Format
 Reliability Check
 Asynchronous
Data Format
 Maximum Nodes
 Protection
RS-232 or RS-485 (2-wire) to host
1200, 2400, 4800, 9600, 19.2 k, 38.4 k, 57.6 k, and
115.2 kbps
4000 feet (1.2 km)
ASCII command/response protocol
Communication error checking with checksum
1 start bit, 8 data bits, 1 stop bit, no parity
Up to 256 multi-drop systems per host serial port
Transient suppression on
RS-485 communication lines
Power Requirements
 Unregulated +10 to +30 V_DC
 Protected against Power Reversal
 Power Protection
Transient suppression on power input
Mechanical
 Case
 Plug-in Screw
Terminal Block
KJW with captive mounting hardware
Accepts 0.5 mm² to 2.5 mm² , 1 - #12 or 2 - #14 to
#22 AWG
Environment
 Operating Temperature -10 ~ 70° C (14 ~ 158° F)
 Storage Temperature -25 ~ 85° C (-13 ~ 185° F)
 Humidity
5 ~ 95%, non-condensing
Ordering Information
 ADAM-5000/485
 ADAM-5000E
 PCLS-OPC/ADM
 PCLS-OCX
 PCLS-ADAMVIEW32
Distributed DA&C System Based on RS-485 (4 slot)
Distributed DA&C System Based on RS-485 (8 slot)
OPC Server for ADAM-4000/5000 Series (RS-485)
ActiveX Control for Data Acquisition and Control
ADAMView Data Acquisition Software
Distributed DA&C Systems