ADAM-4019 Datasheet, PDF (1/1 Pages) Advantech Co., Ltd. – 8-channel Universal Analog Input Module

ADAM-4019
ADAM-4021
ADAM-4022T
8-channel Universal Analog Input Module
Analog Output Module
Serial Based Dual Loop PID Controller
NEW
ADAM-4019
ADAM-4021
ADAM-4022T
Specifications
Analog Output
§ Effective Resolution
§ Channels
§ Input Type
§ Input Range
16-bit
8 differential channels
for individual input type
thermocouple, mV, V,
mA
±100 mV, ±500 mV, ±1
V, ±2.5 V, ±5 V, ±10 V,
±20 mA
§ T/C Type and Temperature Range
J
0
~
760° C
K
0
~
1370° C
T
-100
~
400° C
E
0
~
1000° C
R
500
~
1750° C
S
500
~
1750° C
B
500
~
1800° C
§ Isolation Voltage
§ Fault and Overvoltage
Protection
§ Input Impedance
§ Bandwidth
3000 V_DC
Resists overvoltage up
to ±35 V
20 MΩ
13.1 Hz @ 50 Hz,
15.72 Hz @ 60 Hz
§ Accuracy
§ Zero Drift
§ Span Drift
§ CMR @ 50/60 Hz
±0.1% of voltage input
±30 mV/° C
±25 ppm/° C
92 dB min.
Built-in Watchdog Timer
Power
§ Power Requirements
§ Power Consumption
Unregulated
+10 ~ +30 V_DC
1.2 W @ 24 V_DC
Ordering Information
§ ADAM-4019
8-channel Universal Analog
Input w/Modbus
Specifications
Analog Output
§ Effective Resolution
§ Output Type
§ Output Range
12-bit
mA, V
0 to 20 mA, 4 to 20 mA,
and 0 to 10 V
§ Isolation Voltage
3000 V_DC
§ Output Impedance 0.5 W
§ Accuracy
±0.1% of FSR for
current output
±0.2% of FSR for
voltage output
§ Readback Accuracy ±1% of FSR
§ Resolution
±0.015% of FSR
§ Zero Drift
Voltage output: ±30
mV/° C
current output: ±0.2
mA/° C
§ Span Temperature Coefficient
±25 ppm/° C
§ Programmable
0.125 ~ 128 mA/sec.
Output Slope
0.0625 ~ 64.0 V/sec.
§ Current Load Resistor 0 to 500 W (source)
Built-in Watchdog Timer
Power
§ Power Requirement
§ Power Consumption
Unregulated
|+10 ~ +30 V_DC
1.4 W @ 24 V_DC
Ordering Information
§ ADAM-4021
Analog Output Module – V or
mA
Specifications
Analog Input
§ Channels
4
§ Input Type
mA, V, Thermistor, RTD
§ Input Range
0 to 20 mA, 4 to 20 mA,
0 to 10 V
§ Thermistor Type and Temperature Ranges
Thermistor 3K:
0 ~ 100° C
Thermistor 10K:
0 ~ 100° C
§ RTD Type and Temperature Ranges
Pt 100 RTD
Pt -100 ~ 100° C
Pt 0 ~ 100° C
Pt 0 ~ 200° C
Pt 0 ~ 600° C
IEC RTD 100 ohms (a = 0.00385)
JIS RTD 100 ohms (a = 0.00392)
Pt 1000 RTD
Pt -40 ~ 160° C
Analog Output
§ Channels
§ Output Type
§ Output Range
2
mA,V
0 to 20 mA, 4 to 20 mA,
0 to 10 V
Digital Input
§ Channels
§ Dry Contact
2
Logic level 0-close to
GND
Logic level 1-open
Digital Output
§ Channels
Surge Protection
(Power)
2
Open Collector to 30 V,
100 mA max. load
3,000 V_DC
Built-in Watchdog Timer
§ Power Requirements Unregulated 10 ~ 30 V_DC
§ Power Consumption 4 W @ 24 V_DC
Ordering Information
§ ADAM-4022T
Serial Based Dual Loop PID
Controller
Remote DA&C Modules
All product specifications are subject to change without notice.
Last Updated: Jul-14-04