ACP-4362 Datasheet, PDF (1/2 Pages) Advantech Co., Ltd. – 4U Rackmount Chassis with 6 Hot-Swap SATA Trays for RAID

ACP-4362/4360
4U Rackmount Chassis with
6 Hot-Swap SATA Trays for RAID
Features
 Supports up to 6 SATA HDDs, which can be hot-swappable if a SATA
RAID card is used
 Supports either an ATX motherboard or a PICMG backplane up to 15 slots
 Supports one slim optical disk drive and one 3.5" FDD or internal HDD
 LED indicators for LAN connectivity and alarm notification for redundant
power supply, HDD activity, system fan and in-chassis temperature
 Reusable, front-accessible filters for easy maintenance
 RAID card compatibility
- ACP-4360: compatible with any RAID cards (no HDD failure/rebuild
indicators)
- ACP-4362: compatible with specific RAID cards (with HDD failure/rebuild
indicators)
 ACP-4362's comprehensive RAID card solution features a web-based RAID
management GUI for function setting and status monitoring
Specifications
Model Name
Storage
Drive Bay
Cooling
Front I/O Interface
Miscellaneous
Environment
Physical Characteristics
HDD (supported)
RAID Card (supported)
HDD Failure/Rebuild Indicators
Slim Optical Drive
(Front-accessible)
3.5"
Fan
Air Filter
USB
LED Indicators
Rear Panel
Temperature
Humidity
Vibration (5 ~ 500 Hz)
Shock
Dimensions (W x H x D)
Weight
ACP-4362
6 (SATA)
Recommended RAID cards only
Yes
ACP-4360
6 (SATA)
Any RAID cards
No
1
1
1 (FDD or internal HDD)
1 (FDD or internal HDD)
1 (12 cm / 114 CFM) + 2 (8 cm / 47 CFM each)
Yes
2
System: Power, HDD (for IDE drives only), fan, temperature, LAN1 and LAN2
SATA HDD trays: HDD power and activity
Backplane version: One D-Sub 9-pin opening
Motherboard version: Five D-Sub 9-pin and one 68-pin SCSI openings
Operating
Non-Operating
0 ~ 40° C (32 ~ 104° F)
-20 ~ 60° C (-4 ~ 140° F)
10 ~ 85 % @ 40° C, non-condensing
10 ~ 95 %@ 40° C, non-condensing
1 Grms
2G
10 G (with 11 ms duration, half sine wave)
30 G
482 x 177 x 502 mm (19" x 7" x 19.8")
19.0 kg (41.8 lb) / 19.5 kg (42.9 lb)
* Please choose ACP-4360 when customers don't use any RAID card or a third party RAID card is used. The SATA HDD hot swappability may be supported, but HDD failure and data
rebuild indicators will not be available.
The ACP-4362 must go with RAID cards recommended by Advantech for all LEDs to function normally.
Power switch Slim optical disk drive
Power Temp. LAN1
HDD Fan LAN2
3.5" FDD or
internal HDD
System reset
Alarm reset
USB
Rear view of ACP-4362MB
Easy-to-maintain system fan
Industrial Computer Chassis
All product specifications are subject to change without notice
Six hot-swappable SATA HDD trays
Last updated : 09-Nov-2009