ACP-2010MB Datasheet, PDF (1/2 Pages) Advantech Co., Ltd. – 2U Rackmount Chassis for ATX/MicroATX Motherboard with Low-profile Rear Bracket Option

ACP-2010MB/
2000MB
2U Rackmount Chassis for ATX/
MicroATX Motherboard with Low-profile
Rear Bracket Option
NEW
Features
 LED indicators and audible alarm notification for system fault detection
 Shock-resistant drive bays to hold one 5.25" and three 3.5" drives
(one front-accessible and two internal)
 Various riser card options to support three full-length PCI or PCIe cards for
expansion
 Supports 300 W / 400 W ATX PFC power supply
 Reusable and washable air filters
Specifications
Disk Drive Bay
Cooling
I/O Interface
Miscellaneous
Environment
Physical Characteristics
5.25"
3.5"
Fan
Air Filters
USB
PS/2
LED Indicators
Rear Panel
Slide Rails
Temperature
Humidity
Vibration (5-500 Hz)
Shock
Acoustic Noise
Altitude
Dimensions (W x H x D)
Weight
RoHS
COMPLIANT
2002/95/EC
Front-accessible
Internal
1
-
1
2
2 (47 CFM each)
Yes
2 (Front accessible)
PS/2 keyboard and mouse, or PS/2 keyboard depends on the enclosed motherboard
Power, HDD, Temperature, Fan
Reserved two 9-pin D-Sub openings
General Devices (http://www.generaldevices.com) C-300 series supported (not included)
Operating
Non-operating
0 ~ 40° C (32 ~ 104° F)
-20 ~ 60° C (-4 ~ 140° F)
10 ~ 85 % @ 40° C, non-condensing
10 ~ 95 %@ 40° C, non-condensing
1 Grms
2G
10 G (with 11 ms duration, half sine wave)
30 G
Less than 52 dB sound pressure at 5 ~ 28° C (41 ~ 82° F)
0 to 3,048 m (0 ~ 10,000 ft)
482 x 88 x 480 mm (19" x 3.46" x 18.9") (ACP-2010MB)
482 x 88 x 450 mm (19" x 3.46" x 17.7") (ACP-2000MB)
13.0 kg / 28.6 lb (ACP-2010MB)
12.5 kg / 27.5 lb (ACP-2000MB)
Power LED
HDD LED
Temp. LED
Fan LED
USB
PS/2 keyboard
connector
One 5.25" drive bay
System reset Alarm reset One 3.5"
switch
switch
drive bay
Inside View
Rear view of ACP-2010MB
Rear I/O bracket for low profile
add-on cards
All product specifications are subject to change without notice
Last updated : 1-Mar-2007