PDV-P9003-1 Datasheet, PDF (1/1 Pages) Advanced Photonix, Inc. – CdS Photoconductive Photocells

CdS Photoconductive Photocells
PDV-P9003-1
P_PA_AC_CKK_AA_GG_EE_DD_IMI_EM_NE_SN_IOS_NIO_S N_INS_CHIN_[mC_mH_] [mm]
±.010 [0.25]
.138 [3.50]
+.015 [0.38]
-.010 [0.25]
.079 [2.00]
EPOXY ON LEADS 3 mm MAX
2X Ø.016 [0.40]
±.010 [0.25]
Ø.165 [4.19]
PLASTIC
COATED
.100 [2.54]
2X 1.023 [26.0]
CERAMIC PACKAGE
FEATURES
• Visible light response
• Sintered construction
• Low cost
DESCRIPTION
The PDV-P9003-1 are (CdS), Photoconductive
photocells designed to sense light from 400 to 700
nm. These light dependent resistors are available in
a wide range of resistance values. They’re packaged
in a two leaded plastic-coated ceramic header.
APPLICATIONS
• Camera exposure
• Shutter controls
• Night light Controls
CELL RESISTANCE VS. ILLUMINANCE
1000
ABSOLUTE MAXIMUM RATING (TA)= 23°C UNLESS OTHERWISE NOTED
SYMBOL PARAMETER
MIN MAX UNITS
100
V_pk
Applied Voltage
150 V
P_{d Δpo/Δt} Continuous Power Dissipation
90 mW/°C
T_O
Operating and Storage Temperature -30 +75 ^°C
T_S
Soldering Temperature*
+260 ^°C
* 0.200 inch from base for 3 seconds with heat sink.
10
1
1
10
Illuminance in lux
100
ELECTRO-OPTICAL CHARACTERISTICS RATING (TA)= 23°C UNLESS OTHERWISE NOTED
SYMBOL
CHARACTERISTIC
TEST CONDITIONS
MIN
TYP
R_D
Dark Resistance
After 10 sec. @ 10 Lux @ 2856 °K 1
R_I
Illuminated Resistance
10 Lux @ 2856 °K
S
Sensitivity
LOG(R100)-LOG(R10)**
LOG(E100)-LOG(E10)***
23
0.85
lrange Spectral Application Range Flooded
400
lpeak
Spectral Application Range Flooded
520
t_r
Rise Time
10 Lux @ 2856 °K
60
T_f
Fall Time
After 10 Lux @ 2856 °K
25
MAX
33
700
UNITS
MW
KW
W/Lux
nm
nm
ms
ms
**R100, R10: cell resistances at 100 Lux and 10 Lux at 2856 °K respectively .
***E100, E10: luminances at 100 Lux and 10 Lux 2856 °K respectively.
Information in this technical datasheet is believed to be correct and reliable. However, no responsibility is assumed for possible inaccuracies or omission. Specifications are
subject to change without notice.
REV 3/30/06