PDV-P8101 Datasheet, PDF (1/1 Pages) Advanced Photonix, Inc. – CdS Photoconductive Photocells

CdS Photoconductive Photocells
PDV-P8101
P_PA_AC_CKK_AA_GG_EE_DID_MI_EM_NE_SIN_OS_NI_SO_INN_CS_HIN_[mC_mH_] [mm]
±.010 [0.25]
.169 [4.29]
+.015 [0.38]
-.010 [0.25]
.079 [2.00]
EPOXY ON LEADS 3 mm MAX
2X Ø.016 [0.40]
±.010 [0.25]
Ø.200 [5.08]
PLASTIC
COATED
.134 [3.40]
2X 1.023 [26.0]
CERAMIC PACKAGE
FEATURES
• Visible light response
• Sintered construction
• Low cost
DESCRIPTION
The PDV-P8101 are (CdS), Photoconductive
photocells designed to sense light from 400 to 700
nm. These light dependent resistors are available in
a wide range of resistance values. They’re packaged
in a two leaded plastic-coated ceramic header.
APPLICATIONS
• Camera exposure
• Shutter controls
• Night light Controls
CELL RESISTANCE VS. ILLUMINANCE
ABSOLUTE MAXIMUM RATING (TA)= 23°C UNLESS OTHERWISE NOTED
1000
SYMBOL PARAMETER
V_pk
P_{d Δpo/Δt}
T_O
T_S
Applied Voltage
Continuous Power Dissipation
Operating and Storage Temperature
Soldering Temperature*
* 0.200 inch from base for 3 seconds with heat sink.
MIN MAX UNITS
150 V
100 mW/°C
-30 +75 ^°C
+260 ^°C
100
10
1
1
10
100
Illum inance in lux
ELECTRO-OPTICAL CHARACTERISTICS RATING (TA)= 23°C UNLESS OTHERWISE NOTED
SYMBOL
R_D
R_I
S
lrange
lpeak
t_r
T_f
CHARACTERISTIC
TEST CONDITIONS
Dark Resistance
After 10 sec. @ 10 Lux @ 2856 °K
Illuminated Resistance
10 Lux @ 2856 °K
Sensitivity
LOG(R100)-LOG(R10)**
LOG(E100)-LOG(E10)***
Spectral Application Range Flooded
Spectral Application Range Flooded
Rise Time
10 Lux @ 2856 °K
Fall Time
After 10 Lux @ 2856 °K
MIN
0.15
4
400
TYP
0.65
520
55
20
**R100, R10: cell resistances at 100 Lux and 10 Lux at 2856 °K respectively .
***E100, E10: luminances at 100 Lux and 10 Lux 2856 °K respectively.
MAX
11
700
UNITS
MW
KW
W/Lux
nm
nm
ms
ms
Information in this technical datasheet is believed to be correct and reliable. However, no responsibility is assumed for possible inaccuracies or omission. Specifications are
subject to change without notice.
REV 3/30/06