PDV-P5001 Datasheet, PDF (1/1 Pages) Advanced Photonix, Inc. – CdS Photoconductive Photocells

CdS Photoconductive Photocells
PDV-P5001
P_PA_AC_CKK_AA_GG_EE_DD_IMI_EM_NE_SN_IOS_NIO_S N_INS_CHIN_[mC_mH_] [mm]
±.010 [0.25]
.366 [9.30]
+.015 [0.38]
-.010 [0.25]
.079 [2.00]
EPOXY ON LEADS 3 mm MAX
2X Ø.016 [0.40]
PLASTIC
COATED
.300 [7.62]
±.010 [0.25]
Ø.433 [11.00]
2X 1.437 [36.5]
CERAMIC PACKAGE
FEATURES
• Visible light response
• Sintered construction
• Low cost
DESCRIPTION
The PDV-P5001 are (CdS), Photoconductive
photocells designed to sense light from 400 to 700
nm. These light dependent resistors are available in
a wide range of resistance values. They’re packaged
in a two leaded plastic-coated ceramic header.
APPLICATIONS
• Camera exposure
• Shutter controls
• Night light Controls
ABSOLUTE MAXIMUM RATING (TA)= 23°C UNLESS OTHERWISE NOTED
SYMBOL PARAMETER
V_pk
P_{d Δpo/Δt}
T_O
T_S
Applied Voltage
Continuous Power Dissipation
Operating and Storage Temperature
Soldering Temperature*
* 0.200 inch from base for 3 seconds with heat sink.
MIN MAX UNITS
350 V
400 mW/°C
-30 +75 ^°C
+260 ^°C
ELECTRO-OPTICAL CHARACTERISTICS RATING (TA)= 23°C UNLESS OTHERWISE NOTED
SYMBOL
R_D
R_I
S
lrange
lpeak
t_r
T_f
CHARACTERISTIC
TEST CONDITIONS
MIN
Dark Resistance
After 10 sec. @ 10 Lux @ 2856 °K 0.3
Illuminated Resistance
10 Lux @ 2856 °K
8
Sensitivity
LOG(R100)-LOG(R10)**
LOG(E100)-LOG(E10)***
Spectral Application Range Flooded
400
Spectral Application Range Flooded
Rise Time
10 Lux @ 2856 °K
Fall Time
After 10 Lux @ 2856 °K
TYP
0.6
520
55
25
**R100, R10: cell resistances at 100 Lux and 10 Lux at 2856 °K respectively .
***E100, E10: luminances at 100 Lux and 10 Lux 2856 °K respectively.
MAX
16
700
UNITS
MW
KW
W/Lux
nm
nm
ms
ms
Information in this technical datasheet is believed to be correct and reliable. However, no responsibility is assumed for possible inaccuracies or omission. Specifications are
subject to change without notice.
REV 3/30/06