NSL-5572 Datasheet, PDF (1/1 Pages) Advanced Photonix, Inc. – TO-5 Ceramic Photocell

Advanced Photonix, Inc.
6.35
7.26
1.64 - 2.27
31.7 Min
5.00 - 5.16
Dimensionsin mm.
Tolerance: +/-0.25
except asindicated
Shoulder
1.14 dia
x0.65 maxhigh
Lead:
0.39 - 0.64
TO-5 Ceramic Photocell
NSL-5572
FEATURES
 Passive resistance output
 Ceramic package
DESCRIPTION
The NSL-5572 is a CdS photoconductive cell on a TO-5 ceramic
substrate. The photocell is encapsulated with epoxy for moisture
resistance.
APPLICATIONS
 Industrial
SYMBOL
V_P
P_d
T_Op
T_Stg
T_S
ABSOLUTE MAXIMUM RATING
(TA)= 23°C UNLESS OTHERWISE NOTED
PARAMETER
MIN MAX
Voltage (peak AC or DC)
120
Power Dissipation @ 25˚C (1)
125
Operating Temperature
-60 +75
Storage Temperature
-60 +75
Soldering Temperature (2)
+260
UNITS
V
mW
°C
°C
°C
Note:
(1) Derate linearly to 0 at 75C
(2) >0.08” from case for <5 sec.
(3) Cells light adapted at 30 to 50 Ftc for 16 hrs
minimum prior to electrical tests.
RELIABILITY
Contact API for recommendations on specific test conditions and procedures.
ELECTRO-OPTICAL CHARACTERISTICS
SYMBOL CHARACTERISTIC
TEST CONDITIONS
RL Light Resistance
2 ftc., 2854˚K (3)
100 ftc., 2854˚K
RD Dark Resistance
5 sec after removal of test light.
P Spectral Peak
(TA)= 23°C, UNLESS OTHERWISE NOTED
MIN TYP
MAX
UNITS
32 47.5
63
KΩ
2.0
KΩ
1.0
MΩ
550
nm
Information in this technical datasheet is believed to be correct and reliable. However, no responsibility is assumed for possible inaccuracies or omission. Specifications are
subject to change without notice. © 2014 Advanced Photonix, Inc. All rights reserved.
Advanced Photonix Inc. 1240 Avenida Acaso, Camarillo CA 93012 • Phone [phone] • Fax [phone] • www.advancedphotonix.com
REV 02/05-15