NSL-5162 Datasheet, PDF (1/1 Pages) Advanced Photonix, Inc. – TO-18 Ceramic Package Photocell

Advanced Photonix, Inc.
3.4 +/- 0.2
TO-18 Ceramic Package Photocell
NSL-5162
36 +/- 2
4.1 +/- 0.2
1.8 Max
2.5
Lead dia.: 0.4 +/- 0.05
Dimensions in mm.
FEATURES
 Passive resistance output
 Ceramic package
DESCRIPTION
The NSL-5162 is a light dependent resistor with sensitivity in the
visible light region. The CdS photoconductive cell is on a TO-18
ceramic and the photocell surface is plastic encapsulated for
moisture resistance.
.
APPLICATIONS
 Industrial
SYMBOL
V_P
P_d
T_Op
T_Stg
T_S
ABSOLUTE MAXIMUM RATING
(TA)= 23°C UNLESS OTHERWISE NOTED
PARAMETER
MIN MAX
Voltage (peak AC or DC)
100
Power Dissipation @ 25˚C (1)
50
Operating Temperature
-60 +75
Storage Temperature
-60 +75
Soldering Temperature (2)
+260
UNITS
V
mW
°C
°C
°C
Note:
(1) Derate linearly to 0 at 75C
(2) >0.05” from base for < 10 sec.
(3) Cells light adapted at 30 to 50 Ftc for 16 hrs
minimum prior to electrical tests.
RELIABILITY
Contact API for recommendations on specific test conditions and procedures.
ELECTRO-OPTICAL CHARACTERISTICS
SYMBOL CHARACTERISTIC
TEST CONDITIONS
RL Light Resistance
2 ftc., 2854˚K (3)
100 ftc., 2854˚K (3)
RD Dark Resistance
5 sec after removal of test light.
P Spectral Peak
(TA)= 23°C, UNLESS OTHERWISE NOTED
MIN TYP
MAX
UNITS
67 100
133
KΩ
3.0
KΩ
67
KΩ
550
nm
Information in this technical datasheet is believed to be correct and reliable. However, no responsibility is assumed for possible inaccuracies or omission. Specifications are
subject to change without notice. © 2014 Advanced Photonix, Inc. All rights reserved.
Advanced Photonix Inc. 1240 Avenida Acaso, Camarillo CA 93012 • Phone [phone] • Fax [phone] • www.advancedphotonix.com
REV 02/06-15