ADT5116TA Datasheet, PDF (1/2 Pages) ADTech – transmitter IC for digital audio interface

www.ad-tech.co.kr
ADT5116TA
General Description
The ADT5115T/ADT5116TA is a transmitter IC for digital audio interface, e.g., DVD
player, digital TV. This IC is packaged with LED in one fiber optic module.
This supports the high speed data transmission near to 16Mbps and direct connections to
modulation IC for digital audio equipment. The ADT5116T/ADT5116TA is very small to
be suitable for any types of fiber transmitting module.
Features
• Low Jitter Output
• High Speed Data Transmission to 16Mbps
• Operating Voltage : 2.7V~5.5V
• Direct connectable to TTL or High Speed CMOS Logic
• LED Driving Current : ADT5116T(typ. 6mA), ADT5116TA(typ. 3mA)
Application
Fiber Optic Module for Digital Audio Equipment
Absolute Maximum Ratings (Ta=25℃)
Parameter
Supply Voltage
Input Voltage
Operating Temperature
Storage Temperature
Symbol
Vcc
Vin
Topr
Tstg
Ratings
Unit
-0.5 ~ 7.0
volts
-0.5 ~ Vcc+0.5
volts
-20 ~ 70
℃
-30 ~ 80
℃
* Stress above those listed under Absolute Maximum Ratings may cause permanent damage of device.
This is stress rating only and functional operation of the device at these or any other conditions above those
indicated in the operational sections of this specification is not implied. Exposure to absolute maximum rating
conditions for longer periods may affect device reliability.
During overload conditions (VIN>Vcc or VIN<GND), those voltage on Vcc pins with respect to ground must
not exceed the values defined by the absolute maximum ratings.
Recommended Operating Conditions
Parameter
Operating Supply voltage
Transmitting Data Rate
Symbol
Vcc
Tdr
Ratings
2.7 ~ 5.5
Max. 16.0
Unit
volts
Mbps
* This specifications are subject to be changed without notice
Mar.20. 2003 / Rev. 0.0
1/2
http://www.ad-tech.co.kr