LP2950ACN-X Datasheet, PDF (4/14 Pages) Advanced Monolithic Systems – Battery Powered Systems

LP2950/LP2951
Note 13: Thermal regulation is defined as the change in output voltage at a time T after a change in power dissipation is applied, excluding load or line
regulation effects. Specifications are for a 50mA load pulse at V_IN =30V (1.25W pulse) for T =10 ms.
Note 14: Regulation is measured at constant junction temperature, using pulse testing with a low duty cycle. Changes in output voltage due to heating effects
are covered under the specification for thermal regulation.
Note 15: Line regulation for the LP2951 is tested at 150°C for I_L = 1 mA. For I_L = 100 µA and T_J = 125°C, line regulation is guaranteed by design to 0.2%. See
typical performance characteristics for line regulation versus temperature and load current.
Note 16: All LP2950 devices have the nominal output voltage coded as the last two digits of the part number. In the LP2951 products, the 3.0V and 3.3V
versions are designated by the last two digits, but the 5V version is denoted with no code of the part number.
BLOCK DIAGRAM AND TYPICAL APPLICATIONS
LP2950-XX
UNREGULATED DC
+
INPUT
+
- _ERROR
AMPLIFIER
+ 1.23V
REFERENCE
OUTPUT
V_OUT
I_L≤ 100mA
+ SEE APPLICATION
HINTS
GROUND
LP2951-XX
UNREGULATED DC
V_OUT
I_L≤ 100mA
7
8
1
+
FEED-
BACK
INPUT
OUTPUT
FROM
CMOS
OR TTL
+
3
SHUT-
DOWN
-
ERROR
AMPLIFIER
50mV
+
++
-
1.23V
REFERENCE
2
SENSE
6
V_TAP
5
ERROR
4
GROUND
+ ^{SEE APPLICATION}
HINTS
330kΩ
TO CMOS
OR TTL
ERROR DETECTION COMPARATOR
Advanced Monolithic Systems, Inc. www.advanced-monolithic.com Phone [phone] Fax [phone]