AMC7637 Datasheet, PDF (2/7 Pages) ADDtek Corp – ULTRA LOW IQ 300mA LOW DROPOUT REGULATOR

AMC7637
ABSOLUTE MAXIMUM RATINGS (Note)
Input Voltage, V_IN
Maximum Operating Junction Temperature, T_J
Storage Temperature Range
Lead Temperature (soldering, 10 seconds)
Note: Exceeding these ratings could cause damage to the device. All voltages are with respect to Ground.
Currents are positive into, negative out of the specified terminal.
8V
150^°C
-65^°C to 150^°C
260^°C
THERMAL DATA
Thermal Resistance from Junction to Ambient, θ _JA
Junction Temperature Calculation: T_J = T_A + (P_D × θ _JA).
The θ_JA numbers are guidelines for the thermal performance of the device/pc-board system.
Connect the ground pin to ground using a large pad or ground plane for better heat dissipation.
All of the above assume no ambient airflow.
250 ^OC /W
Maximum Power Calculation:
P_D(MAX)=
T_J(MAX) – T_A(MAX)
θ_JA
T_J(^OC): Maximum recommended junction temperature
T_A(^OC): Ambient temperature of the application
θ_JA(^OC /W): Junction-to-Ambient temperature thermal resistance of the package, and other heat dissipating materials.
The maximum power dissipation for a single-output regulator is:
P_D(MAX) = [(V_IN(MAX) - V_OUT(NOM))] × I_OUT(NOM) + V_IN(MAX) × I_Q
Where:
Then
V_OUT(NOM) = the nominal output voltage
I_OUT(NOM) = the nominal output current, and
I_Q = the quiescent current the regulator consumes at I_OUT(MAX)
V_IN(MAX) = the maximum input voltage
θ_JA = (125 ^OC – T_A)/P_D
BLOCK DIAGRAM
V_IN
Current
Limiter
V_OUT
GND
V_REF
Copyright © 2007 ADDtek Corp.
2
DD053_C -- JUNE 2007