E333935 Datasheet, PDF (2/2 Pages) Adam Technologies, Inc. – Terminal Blocks - Component

TBC Series Followed by
02 thru 30 [@]
18-14, Str.
TBH Series Followed by 02 18-14, Str.
thru 24 [&]
TBB Series Followed by 02 22-18, Str.
thru 29 [&]
TBD Series Followed by
02 thru 32 [&]
18-14, Str.
TDA Series [+]
TDB Series [+]
TDC Series [+]
TDG Series [+]
TDF Series [+]
TDH Series [+]
18-14, Str.
18-12, Str.
18-12, Str.
16, Str.
16, Str.
14, Str.
300 Note A
D
CU
1
8.7 300
15
B
2(105)
300 Note A
CU
2
8.7 300
15
D
B
2(105), 4
300 Note A
D
CU
1
8.7 300
10 B,C,D
2(105)
CU
1
8.7 300
15
B
2(105)
300 Note A
CU
1
8.7 300
10
CU
1 10.4 300
20
CU
1 15.6 300
30
Cu
1
4 400
6
Cu
1
4 400
6
Cu
1
5 400
10
D
B 2(115), 3(3)
B 2(115), 3(3.5)
B 2(115), 3(4)
B,C
2(105)
B,C
2(105)
B,C
2(105)
A - These limited ratings are applicable to a terminal block for use in or with industrial control equipment whereby the load on
any single circuit of the terminal block does not exceed 15 A at 51-150 V, 10 A at 151-300 V or 5 A at 301-600 V or the
maximum ampere rating, whichever is less.
[&] - Followed by 01, followed by B.
[@] - Followed by 01, followed by M.
[%] - followed by 06, followed by B.
[+] - Followed by 02 thru 56.
Marking: Company name and catalog designation (catalog designation may appear on shipping carton).
Last Updated on 2011-09-27
Questions?
Print this page
Terms of Use
Page Top
© 2012 UL LLC
When the UL Leaf Mark is on the product, or when the word "Environment" is included in the UL Mark, please search the UL
Environment database for additional information regarding this product's certification.
The appearance of a company's name or product in this database does not in itself assure that products so identified have been
manufactured under UL's Follow-Up Service. Only those products bearing the UL Mark should be considered to be Listed and
covered under UL's Follow-Up Service. Always look for the Mark on the product.
UL permits the reproduction of the material contained in the Online Certification Directory subject to the following conditions: 1.
The Guide Information, Designs and/or Listings (files) must be presented in their entirety and in a non-misleading manner,
without any manipulation of the data (or drawings). 2. The statement "Reprinted from the Online Certifications Directory with
permission from UL" must appear adjacent to the extracted material. In addition, the reprinted material must include a
copyright notice in the following format: "© 2012 UL LLC".