2PH140UA Datasheet, PDF (1/1 Pages) Adam Technologies, Inc. – 2.00mm PIN HEADERS .079 [2.00] CENTERLINE

Adam Technologies, Inc.
2.00mm PIN HEADERS
.079" [2.00] CENTERLINE
2PH SERIES
INTRODUCTION
Adam Tech 2PH & D2PH Series 2.0mm Pin Headers offer a full
range of fine pitched headers in a variety of configurations including
Single, Dual and Three rows, Straight & Right Angle in Thru-Hole or
SMT mounting. Their close tolerance .020" sq. posts are smoothly
finished and taper tipped to eliminate insertion damage to the PCB or
mating connector. Adam Tech 2.0mm Pin Headers can be easily cut
into exact sizes as required. Options include stacked insulator
versions and choice of tin, gold or selective gold plating. This series
is compatible with all industry standard 2.0mm pitch mating
connectors.
FEATURES:
Single, Dual or Three Row
Tin, gold or selective gold plating options
Thru-hole or SMT mounting
Stacked and Custom length versions available
Versatile Breakaway design
Hi Temp Insulator available
MATING RECEPTACLES:
Mates with all industry standard .050" pitch female headers
SPECIFICATIONS:
Material:
Standard insulator: PBT, glass reinforced, rated UL94V-0
Optional Hi-Temp insulator: Nylon 6T, rated UL94V-0
Insulator Color: Black
Contacts: Brass
ORDERING INFORMATION
2PH1 40
U
A
SERIES INDICATOR
2PH1 = 2.00mm Single
Row Straight
Pin Header
2PH2 = 2.00mm Dual
Row Straight
Pin Header
2PH1R = 2.00mm Single
Row Right
Angle Pin
Header
2PH2R = 2.00mm Dual
Row Right
Angle
Pin Header
POSITIONS
Single row: 1 thru 40
Dual row: 2 thru 80
PIN LENGTH
A = Standard
length
B = Special
length,
customer
specified
defined as:
tail dim/total
length
PLATING
U = Gold plated
T = Tin plated
SG = Selective gold
plating in contact
area, tin plating
on solder tails
Plating:
U = Gold flash (30u” optional) over nickel underplate overall
SG = Gold flash (30u” optional) over nickel underplate on
contact area, tin over copper underplate on tails.
T = Tin over copper underplate overall
Electrical:
ORDERING INFORMATION
DUAL INSULATOR HEADERS
D2PH 1
40 SG .xxx"/.xxx"/.xxx
“C” DIM. “D” DIM. “E” DIM.
Operating voltage: 250V AC max.
Current rating: 1 Amp max.
Contact resistance: 20 mΩ max. initial
Insulation resistance: 5000 MΩ min.
Dielectric withstanding voltage: 1000V AC for 1 minute
Mechanical:
Mating durability: 1,000 cycles
Temperature Rating:
Operating temperature: -55°C to +105°C
Soldering process temperature: 260°C
PACKAGING:
Anti-ESD plastic bags
(Tape and Reel available for SMT option)
APPROVALS AND CERTIFICATIONS:
UL Recognized File No. E224053
CSA Certified File No. LR1578596
UL
®
HI-TEMP
INSULATOR
AVA I L A B L E
Pb
®
® RV oHS
DCOEMPLIANT
2002 / 95 / EC
PLATING
U = Gold plated
NO. OF ROWS
1 = Single row
2 = Dual row
T = Tin plated
SG = Selective
gold plating
in contact
SERIES
INDICATOR
D2PH = 2mm Dual
area tin
plating on
solder tails
Insulator
Pin Header
STACKING DIMENSIONS
Specified In Inches As:
“C” Dim. / “D” Dim. / “E” Dim.
Replace “D” Dim. with “SMT”
for Surface Mount Option
POSITIONS
Single row: 2 thru 40
OPTIONS: Add designator(s) to end of part number
SMT = Surface Mount leads Dual Row
SMT-A = Surface Mount leads Type A
SMT-B = Surface Mount Leads Type B
RoHS
HT = Hi-Temp insulator for Hi-Temp soldering processes up to 26^C0^O°^MC^PLIANT
Dual row: 4 thru 80
(Add this option for thru-hole products only. All SMT products are manufactured with Hi-Temp insulators)
L = Low profile 1.5mm insulator thickness
P = Locating pegs
BR = Board retention sold
246
909 Rahway Avenue • Union, New Jersey 07083 • T: 908-687-5000 • F: 908-687-5710 • WWW.ADAM-TECH.COM