ADG793G Datasheet, PDF (9/24 Pages) Analog Devices – I2C-Compatible, Wide Bandwidth, Triple 3:1 Multiplexer

ABSOLUTE MAXIMUM RATINGS
TA = 25°C, unless otherwise noted.
Table 4.
Parameter
VDD to GND
Analog, Digital Inputs
Continuous Current, S or D Pins
Peak Current, S or D Pins
Operating Temperature Range
Industrial (B Version)
Storage Temperature Range
Junction Temperature
θJA Thermal Impedance
24-Lead LFCSP
Lead Temperature, Soldering
(10 sec)
IR Reflow, Peak Temperature
(<20 sec)
Rating
−0.3 V to +6 V
−0.3 V to VDD + 0.3 V or 30 mA,
whichever occurs first
100 mA
300 mA (pulsed at 1 ms,
10% duty cycle max)
−40°C to +85°C
−65°C to +150°C
150°C
30°C/W
300°C
260°C
ADG793A/ADG793G
Stresses above those listed under Absolute Maximum Ratings
may cause permanent damage to the device. This is a stress
rating only; functional operation of the device at these or any
other conditions above those indicated in the operational
section of this specification is not implied. Exposure to absolute
maximum rating conditions for extended periods may affect
device reliability.
Only one absolute maximum rating can be applied at any one
time.
ESD CAUTION
ESD (electrostatic discharge) sensitive device. Electrostatic charges as high as 4000 V readily accumulate on
the human body and test equipment and can discharge without detection. Although this product features
proprietary ESD protection circuitry, permanent damage may occur on devices subjected to high energy
electrostatic discharges. Therefore, proper ESD precautions are recommended to avoid performance
degradation or loss of functionality.
Rev. 0 | Page 9 of 24