5962-8850501RA Datasheet, PDF (9/10 Pages) Analog Devices – 10-Bit A/D Converter

OUTLINE DIMENSIONS
0.005 (0.13) MIN
20
PIN 1
1
0.080 (2.03) MAX
11 _{0.300 (7.62)}
0.280 (7.11)
10
0.200 (5.08)
MAX
1.060 (28.92)
0.990 (25.15)
0.060 (1.52)
0.015 (0.38)
0.200 (5.08)
0.125 (3.18)
0.023 (0.58)
0.014 (0.36)
0.100
(2.54)
BSC
0.150
(3.81)
MIN
0.070 (1.78) ^SEATING
0.030 (0.76) ^PLANE
0.320 (8.13)
0.300 (7.62)
0.015 (0.38)
0.008 (0.20)
CONTROLLING DIMENSIONS ARE IN INCHES; MILLIMETER DIMENSIONS
(IN PARENTHESES) ARE ROUNDED-OFF INCH EQUIVALENTS FOR
REFERENCE ONLY AND ARE NOT APPROPRIATE FOR USE IN DESIGN.
Figure 18. 20-Lead Side-Brazed Ceramic Dual In-Line Package [SBDIP]
(D-20)
Dimensions shown in inches and (millimeters)
1.060 (26.92)
1.030 (26.16)
0.980 (24.89)
20
1
0.210 (5.33)
MAX
0.150 (3.81)
0.130 (3.30)
0.115 (2.92)
0.100 (2.54)
BSC
0.022 (0.56)
0.018 (0.46)
0.014 (0.36)
0.070 (1.78)
0.060 (1.52)
0.045 (1.14)
11 _{0.280 (7.11)}
0.250 (6.35)
10 ^{0.240 (6.10)}
0.060 (1.52)
MAX
0.015
(0.38)
MIN
0.015 (0.38)
GAUGE
SEATING
PLANE
PLANE
0.005 (0.13)
MIN
0.325 (8.26)
0.310 (7.87)
0.300 (7.62)
0.430 (10.92)
MAX
0.195 (4.95)
0.130 (3.30)
0.115 (2.92)
0.014 (0.36)
0.010 (0.25)
0.008 (0.20)
COMPLIANT TO JEDEC STANDARDS MS-001
CONTROLLING DIMENSIONS ARE IN INCHES; MILLIMETER DIMENSIONS
(IN PARENTHESES) ARE ROUNDED-OFF INCH EQUIVALENTS FOR
REFERENCE ONLY AND ARE NOT APPROPRIATE FOR USE IN DESIGN.
CORNER LEADS MAY BE CONFIGURED AS WHOLE OR HALF LEADS.
Figure 19. 20-Lead Plastic Dual In-Line Package [PDIP] Narrow Body
(N-20)
Dimensions shown in inches and (millimeters)
AD573
REV. B
-9-