CN0336 Datasheet, PDF (7/7 Pages) Analog Devices – Devices Connected

Circuit Note
LEARN MORE
CN0336 Design Support Package:
http://www.analog.com/CN0336-DesignSupport
Chen, Baoxing, John Wynne, and Ronn Kliger. High Speed
Digital Isolators Using Microscale On-Chip Transformers,
Analog Devices, 2003
Chen, Baoxing. iCoupler® Products with isoPower™ Technology:
Signal and Power Transfer Across Isolation Barrier Using
Microtransformers, Analog Devices, 2006
Ghiorse, Rich. Application Note AN-825, Power Supply
Considerations in iCoupler® Isolation Products, Analog
Devices
Krakauer, David. “Digital Isolation Offers Compact, Low-Cost
Solutions to Challenging Design Problems.”Analog Dialogue.
Volume 40, December 2006.
MT-031 Tutorial, Grounding Data Converters and Solving the
Mystery of "AGND" and "DGND," Analog Devices
MT-101 Tutorial, Decoupling Techniques, Analog Devices
Wayne, Scott. “iCoupler® Digital Isolators Protect RS-232, RS-
485, and CAN Buses in Industrial, Instrumentation, and
Computer Apps, Analog Dialogue, Volume 39, Number 4,
2005.
CN-0336
Data Sheets and Evaluation Boards
AD8606 Data Sheet
AD7091R Data Sheet
ADuM5401 Data Sheet
REVISION HISTORY
3/14—Rev. 0 to Rev. A
Change to Circuit Function and Benefits Section ........................ 1
2/14—Revision 0: Initial Version
(Continued from first page) Circuits from the Lab reference designs are intended only for use with Analog Devices products and are the intellectual property of Analog Devices or its licensors.
While you may use the Circuits from the Lab reference designs in the design of your product, no other license is granted by implication or otherwise under any patents or other intellectual
property by application or use of the Circuits from the Lab reference designs. Information furnished by Analog Devices is believed to be accurate and reliable. However, Circuits from the
Lab reference designs are supplied "as is" and without warranties of any kind, express, implied, or statutory including, but not limited to, any implied warranty of merchantability,
noninfringement or fitness for a particular purpose and no responsibility is assumed by Analog Devices for their use, nor for any infringements of patents or other rights of third parties
that may result from their use. Analog Devices reserves the right to change any Circuits from the Lab reference designs at any time without notice but is under no obligation to do so.
©2014 Analog Devices, Inc. All rights reserved. Trademarks and
registered trademarks are the property of their respective owners.
CN11650-0-3/14(A)
Rev. A | Page 7 of 7