ADG1233_15 Datasheet, PDF (7/16 Pages) Analog Devices – Low Capacitance, Triple/Quad SPDT

ABSOLUTE MAXIMUM RATINGS
TA = 25°C, unless otherwise noted.
Table 3.
Parameter
VDD to VSS
VDD to GND
VSS to GND
Analog, Digital Inputs¹
Continuous Current, S or D
Peak Current, S or D (Pulsed at
1 ms, 10% Duty Cycle Maximum)
Operating Temperature Range
Automotive Temperature Range
(Y Version)
Storage Temperature Range
Junction Temperature
TSSOP, θJA, Thermal Impedance
LFCSP, θJA, Thermal Impedance
Reflow Soldering Peak Temperature,
Pb-Fee
Rating
35 V
−0.3 V to +25 V
+0.3 V to −25 V
VSS − 0.3 V to VDD + 0.3 V or
30 mA, whichever occurs
first
24 mA
100 mA
−40°C to +125°C
−65°C to +150°C
150°C
112°C/W
30.4°C/W
260°C
1 _{Overvoltages at A, EN, S, or D are clamped by internal diodes. Current should}
be limited to the maximum ratings given.
ADG1233/ADG1234
Stresses above those listed under Absolute Maximum Ratings
may cause permanent damage to the device. This is a stress
rating only; functional operation of the device at these or any
other conditions above those indicated in the operational
section of this specification is not implied. Exposure to absolute
maximum rating conditions for extended periods may affect
device reliability.
Only one absolute maximum rating is applied at any one time.
ESD CAUTION
ESD (electrostatic discharge) sensitive device. Electrostatic charges as high as 4000 V readily accumulate on
the human body and test equipment and can discharge without detection. Although this product features
proprietary ESD protection circuitry, permanent damage may occur on devices subjected to high energy
electrostatic discharges. Therefore, proper ESD precautions are recommended to avoid performance
degradation or loss of functionality.
Rev. B | Page 7 of 16