ADA4638-1_16 Datasheet, PDF (7/25 Pages) Analog Devices – 30 V Zero-Drift, Rail-to-Rail Output Precision Amplifier

ADA4638-1
ABSOLUTE MAXIMUM RATINGS
Table 5.
Parameter
Supply Voltage
Input Voltage¹
Input Current
Differential Input Voltage
Output Short-Circuit Duration to GND
Storage Temperature Range
Operating Temperature Range
Junction Temperature Range
Lead Temperature (Soldering, 60 sec)
Rating
33 V
±VSY
±10 mA
±VSY
Indefinite
−65°C to +150°C
−40°C to +125°C
−65°C to +150°C
300°C
1 _{Input voltage should always be limited to less than 30 V.}
Stresses above those listed under Absolute Maximum Ratings
may cause permanent damage to the device. This is a stress
rating only; functional operation of the device at these or any
other conditions above those indicated in the operational
section of this specification is not implied. Exposure to absolute
maximum rating conditions for extended periods may affect
device reliability.
Data Sheet
THERMAL RESISTANCE
θJA is specified for a device soldered on a 4-layer JEDEC
standard board with zero airflow. For LFCSP packages, the
exposed pad is soldered to the board.
Table 6. Thermal Resistance
Package Type
θJA
8-Lead SOIC
120
8-Lead LFCSP
75
θJC
Unit
45
°C/W
12
°C/W
ESD CAUTION
Rev. 0 | Page 6 of 24