AD9861BCPZ-50 Datasheet, PDF (7/52 Pages) Analog Devices – Mixed-Signal Front-End (MxFE) Baseband Transceiver for Broadband Applications

ABSOLUTE MAXIMUM RATINGS
Table 7.
Parameter
Rating
Electrical
AVDD Voltage
3.9 V max
DRVDD Voltage
3.9 V max
Analog Input Voltage
–0.3 V to AVDD + 0.3 V
Digital Input Voltage
–0.3 V to DVDD – 0.3 V
Digital Output Current
5 mA max
Environmental
Operating Temperature Range
(Ambient)
–40°C to +85°C
Maximum Junction Temperature
150°C
Lead Temperature (Soldering, 10 sec) 300°C
Storage Temperature Range
(Ambient)
–65°C to +150°C
Stresses above those listed under the Absolute Maximum
Ratings may cause permanent damage to the device. This is a
stress rating only; functional operation of the device at these or
any other conditions above those indicated in the operational
section of this specification is not implied. Exposure to absolute
maximum rating conditions for extended periods may affect
device reliability.
AD9861
Thermal Resistance
64-lead LFCSP (4-layer board):
θJA = 24.2 (paddle soldered to ground plan, 0 LPM Air)
θJA = 30.8 (paddle not soldered to ground plan, 0 LPM Air)
ESD CAUTION
ESD (electrostatic discharge) sensitive device. Electrostatic charges as high as 4000 V readily accumulate on the
human body and test equipment and can discharge without detection. Although this product features
proprietary ESD protection circuitry, permanent damage may occur on devices subjected to high energy
electrostatic discharges. Therefore, proper ESD precautions are recommended to avoid performance
degradation or loss of functionality.
Rev. 0 | Page 7 of 52