OP183_05 Datasheet, PDF (6/16 Pages) Analog Devices – 5 MHz Single-Supply Operational Amplifier

OP183
ABSOLUTE MAXIMUM RATINGS
Table 4.
Parameter
Rating
Supply Voltage
Input Voltage
Differential Input Voltage¹
Output Short-Circuit Duration to GND
Storage Temperature Range
±18 V
±18 V
±7 V
Indefinite
S Package
Operating Temperature Range
−65°C to +150°C
OP183
Junction Temperature Range
−40°C to +85°C
S Package
−65°C to +150°C
Lead Temperature Range (Soldering 60 sec) 300°C
1 _{For supply voltages less than ±7 V, the absolute maximum input voltage is}
equal to the supply voltage. Maximum input current should not exceed
2 mA.
Stresses above those listed under Absolute Maximum Ratings
may cause permanent damage to the device. This is a stress
rating only; functional operation of the device at these or any
other conditions above those indicated in the operational
section of this specification is not implied. Exposure to absolute
maximum rating conditions for extended periods may affect
device reliability.
Absolute maximum ratings apply to packaged parts, unless
otherwise noted.
Table 5.
Package Type
8-Lead SOIC (S)
θJA1
θJC
Units
158
43
°C/W
1 _{θJA is specified for worst-case conditions; in other words, θJA is specified for}
device soldered in circuit board for SOIC packages.
ESD CAUTION
ESD (electrostatic discharge) sensitive device. Electrostatic charges as high as 4000 V readily accumulate on
the human body and test equipment and can discharge without detection. Although this product features
proprietary ESD protection circuitry, permanent damage may occur on devices subjected to high energy
electrostatic discharges. Therefore, proper ESD precautions are recommended to avoid performance
degradation or loss of functionality.
Rev. D | Page 6 of 16