HMC534LP5 Datasheet, PDF (6/6 Pages) Hittite Microwave Corporation – MMIC VCO w/ HALF FREQUENCY OUTPUT & DIVIDE-BY-4, 10.6 - 11.8 GHz

Evaluation PCB
HMC534LP5 / 534LP5E
v03.0811
MMIC VCO w/ HALF FREQUENCY OUTPUT
& DIVIDE-BY-4, 10.6 - 11.8 GHz
8
List of Materials for Evaluation PCB 110227 ^[1]
Item
Description
J1 - J4
PCB Mount SMA RF Connector
J5 - J6
2 mm DC Header
C1 - C3
100 pF Capacitor, 0402 Pkg.
C4
1,000 pF Capacitor, 0402 Pkg.
C5 - C7
2.2 µF Tantalum Capacitor
U1
PCB ^[2]
HMC534LP5 / HMC534LP5E VCO
110225 Eval Board
[1] Reference this number when ordering complete evaluation PCB
The circuit board used in the final application
should use RF circuit design techniques. Signal
lines should have 50 Ohm impedance while the
package ground leads and backside ground paddle
should be connected directly to the ground plane
similar to that shown. A sufficient number of via
holes should be used to connect the top and bottom
ground planes. The evaluation circuit board shown
is available from Hittite upon request.
[2] Circuit Board Material: Rogers 4350
Irrliniecgfseohpntrs_{Fomsenoaosftiisirbtohingilprirtdyafr}unpi_irst_cnaeairds_etsihesb,esuydm_{dthimebaedtyplmlbiiAcvyaanPyeAtaiorlhnr}oena_ygs_oluoonlDargt eof_{enDrvtoh:eidmcev9}ericwis_{tt7esoissi8usefspo-}beur_2.neliadtSl5iseep_cvu_0reeseca-deinf_{3,iyoctno3aoprtrida4}boftenoe_{e3srnartascsnoucyrb:}ujipern_HFaacfrttt_aeie_inttnoxgtate_{icn:rtmhdieg9aehnrn7teMgstls8eiaooi}bwf_-cf2lAiept_{rhn.5aooatHue0lwotong-}wnt_as3oDeotvvi_3ecreeveo7ri,.cth_3eNCnesoor._{orpFOPOoohnrroredanpTeetreii:rocc7enhO8,n,1nod-23l-eo0l2lgii9vnyAe-e4rWly7pa,a0hyta0,anw•PdR.wOOtoor.wdBaep.dohrlaxo,ictn9Ctel1iitn0hoee6re.d,caleNmtorwosms:rwwfAowonro.daadln,o,agMMloADAge.0cv02oic10me68s22,-49In10c.6,}
Trademarks and registered trademarks ar_Ae t_phe_pp_lr_io_cpe_art_ty_ioof_nthe_Sir _ure_psp_pec_otiv_re_t:ow_Pne_hrs_o. _{ne: 978-250-3}A₃p₄p₃lica_ot_rion_aS_pu_pp_sp_@or_ht:_iP_tth_ito_en_.e_c: _o1-_m800-ANALOG-D
8-6