EVAL-ADG884EBZ Datasheet, PDF (6/16 Pages) Analog Devices – 0.5 Ω CMOS, Dual 2:1 MUX/SPDT Audio Switch

ADG884
ABSOLUTE MAXIMUM RATINGS
TA = 25°C, unless otherwise noted.
Table 4.
Parameter
VDD to GND
Analog Inputs,¹ Digital Inputs
Peak Current, S or D
Continuous Current, S or D
Operating Temperature Range
Storage Temperature Range
Junction Temperature
10-Lead MSOP, Thermal Impedance
θJA
θJC
10-Ball WLCSP (4-Layer Board),
Thermal Impedance
θJA
10-Lead LFCSP_WD (4-Layer Board),
Thermal Impedance
θJA
θJC
Reflow Soldering (Pb-Free)
Peak Temperature
Time at Peak Temperature
Rating
−0.3 V to +6 V
−0.3 V to VDD + 0.3 V or 30 mA
(whichever occurs first)
600 mA (pulsed at 1 ms, 10%
duty cycle maximum)
400 mA
−40°C to +85°C
−65°C to +150°C
150°C
206°C/W
44°C/W
120°C/W
76°C/W
13.5°C/W
260(+ 0 or −5)°C
10 sec to 40 sec
1 _{Overvoltages at IN, S, or D pins are clamped by internal diodes. Current}
should be limited to the maximum ratings given.
Data Sheet
Stresses above those listed under Absolute Maximum Ratings
may cause permanent damage to the device. This is a stress
rating only; functional operation of the device at these or any
other conditions above those indicated in the operational
section of this specification is not implied. Exposure to absolute
maximum rating conditions for extended periods may affect
device reliability.
Only one absolute maximum rating can be applied at any
one time.
ESD CAUTION
Rev. D | Page 6 of 16