ADUM6000 Datasheet, PDF (6/16 Pages) Analog Devices – Isolated, 5 kV, DC-to-DC Converter

ADuM6000
Data Sheet
DIN V VDE V 0884-10 (VDE V 0884-10) AND IEC 60747-5-2 (VDE 0884 PART 2):2003-01 INSULATION
CHARACTERISTICS
This power module is suitable for reinforced electrical isolation only within the safety limit data. Maintenance of the safety data is ensured
by protective circuits. The asterisk (*) marking branded on the component designates DIN V VDE V 0884-10 (VDE V 0884-10) or
IEC 60747-5-2 (VDE 0884 Part 2):2003-01 approval.
Table 8.
Description
Installation Classification per DIN VDE 0110
For Rated Mains Voltage ≤ 150 V rms
For Rated Mains Voltage ≤ 300 V rms
For Rated Mains Voltage ≤ 400 V rms
Climatic Classification
Pollution Degree per DIN VDE 0110, Table 1
Maximum Working Insulation Voltage
Input-to-Output Test Voltage, Method B1
Input-to-Output Test Voltage, Method A
After Environmental Tests Subgroup 1
After Input and/or Safety Test Subgroup 2
and Subgroup 3
Highest Allowable Overvoltage
Surge Isolation Voltage
Safety-Limiting Values
Maximum Junction Temperature
Total Power Dissipation @ 25°C
Insulation Resistance at TS
Conditions
Symbol Characteristic Unit
VIORM × 1.875 = Vpd(m), 100% production test, tini = tm =
1 sec, partial discharge < 5 pC
VIORM × 1.5 = Vpd(m), tini = 60 sec, tm = 10 sec, partial
discharge < 5 pC
VIORM
Vpd(m)
Vpd(m)
VIORM × 1.2 = Vpd(m), tini = 60 sec, tm = 10 sec, partial
discharge < 5 pC
VPEAK = 10 kV, 1.2 µs rise time, 50 µs, 50% fall time
Maximum value allowed in the event of a failure (see
Figure 2)
VIO = 500 V
Vpd(m)
VIOTM
VIOSM
TS
PS
RS
I to IV
I to IV
I to III
40/105/21
2
849
1592
1273
1018
6000
6000
150
2.78
>10⁹
V peak
V peak
V peak
V peak
V peak
V peak
°C
W
Ω
Thermal Derating Curve
3.0
2.5
2.0
1.5
1.0
0.5
0
0
50
100
150
200
AMBIENT TEMPERATURE (°C)
Figure 2. Thermal Derating Curve, Dependence of Safety-Limiting Values on Case Temperature, per DIN EN 60747-5-2
Rev. D | Page 6 of 16