ADM485E_15 Datasheet, PDF (6/16 Pages) Analog Devices – Half-Duplex, RS-485/RS-422 Transceivers

ADM485E/ADM487E/ADM1487E
ABSOLUTE MAXIMUM RATINGS
TA = 25°C, unless otherwise noted.
Table 5.
Parameter
VCC to GND
Digital I/O Voltage (DE, RE)
Driver Input Voltage (DI)
Receiver Output Voltage (RO)
Driver Output/Receiver Input Voltage
(A, B)
Operating Temperature Range
Storage Temperature Range
θJA Thermal Impedance, 8-Lead SOIC
Lead Temperature, Soldering (10 sec)
Rating
−0.5 V to +6 V
−0.5 V to (VCC + 0.5 V)
−0.5 V to (VCC + 0.5 V)
−0.5 V to (VCC + 0.5 V)
−9 V to +14 V
−40°C to +85°C
−65°C to +150°C
158°C/W
260°C
Stresses above those listed under Absolute Maximum Ratings
may cause permanent damage to the device. This is a stress
rating only; functional operation of the device at these or any
other conditions above those indicated in the operational
section of this specification is not implied. Exposure to absolute
maximum rating conditions for extended periods may affect
device reliability.
ESD CAUTION
Rev. B | Page 6 of 16