ADG842_15 Datasheet, PDF (6/16 Pages) Analog Devices – Single SPST Switches in SC70

ADG841/ADG842
ABSOLUTE MAXIMUM RATINGS
TA = 25°C, unless otherwise noted.
Table 5.
Parameter
VDD to GND
Analog Inputs¹
Digital Inputs¹
Peak Current, S or D
3.3 V Operation
2.5 V Operation
1.8 V Operation
Continuous Current, S or D
3.3 V Operation
2.5 V Operation
1.8 V Operation
Operating Temperature Range
Automotive (Y Version)
Storage Temperature Range
Junction Temperature
SC70 Package
θJA Thermal Impedance
Reflow Soldering (Pb-free)
Peak Temperature
Time at Peak Temperature
Rating
−0.3 V to +4.6 V
−0.3 V to VDD + 0.3 V
−0.3 V to 4.6 V or 10 mA,
whichever occurs first
500 mA
460 mA
420 mA (pulsed at 1 ms,
10% duty cycle max)
300 mA
275 mA
250 mA
−40°C to +125°C
−65°C to +150°C
150°C
494.8°C/W
260(+0/−5)°C
10 sec to 40 sec
1 _{Overvoltages at S or D are clamped by internal diodes. Current should be}
limited to the maximum ratings given.
Stresses above those listed under Absolute Maximum Ratings
may cause permanent damage to the device. This is a stress
rating only; functional operation of the device at these or any
other conditions above those indicated in the operational
section of this specification is not implied. Exposure to absolute
maximum rating conditions for extended periods may affect
device reliability. Only one absolute maximum rating may be
applied at any one time.
ESD CAUTION
ESD (electrostatic discharge) sensitive device. Electrostatic charges as high as 4000 V readily accumulate on
the human body and test equipment and can discharge without detection. Although this product features
proprietary ESD protection circuitry, permanent damage may occur on devices subjected to high energy
electrostatic discharges. Therefore, proper ESD precautions are recommended to avoid performance
degradation or loss of functionality.
Rev. 0 | Page 6 of 16