ADG633_09 Datasheet, PDF (6/16 Pages) Analog Devices – CMOS, ±5 V/+5 V/+3 V, Triple SPDT Switch

ADG633
ABSOLUTE MAXIMUM RATINGS
TA = 25°C, unless otherwise noted.
Table 4.
Parameter
VDD to VSS
VDD to GND
VSS to GND
Analog Inputs¹
Digital Inputs¹
Peak Current, S or D
Continuous Current, S or D
Operating Temperature Range
Storage Temperature Range
Junction Temperature
θJA Thermal Impedance
16-Lead TSSOP
16-Lead LFCSP, 4-Layer Board
Lead Soldering
Lead Temperature, Soldering
(10 sec)
IR Reflow, Peak Temperature
(<20 sec)
(Pb-Free) Soldering
Reflow, Peak Temperature
Time at Peak Temperature
ESD
Rating
13 V
−0.3 V to +13 V
+0.3 V to −6.5 V
VSS − 0.3 V to VDD + 0.3 V
GND − 0.3 V to VDD + 0.3 V or
10 mA, whichever occurs first
40 mA (pulsed at 1 ms, 10%
duty cycle maximum)
20 mA
−40°C to +125°C
−65°C to +150°C
150°C
150.4°C/W
70°C/W
300°C
220°C
260(+0/−5)°C
20 sec to 40 sec
4 kV
1_{Overvoltages at Ax, EN, S, or D are clamped by internal diodes. Current}
should be limited to the maximum ratings given.
Stresses above those listed under Absolute Maximum Ratings
may cause permanent damage to the device. This is a stress
rating only; functional operation of the device at these or any
other conditions above those indicated in the operational
section of this specification is not implied. Exposure to absolute
maximum rating conditions for extended periods may affect
device reliability.
Only one absolute maximum rating can be applied at any one time.
ESD CAUTION
Rev. A | Page 6 of 16