ADA4665-2_16 Datasheet, PDF (6/21 Pages) Analog Devices – 16 V, 1 MHz, CMOS Rail-to-Rail Input/Output Operational Amplifier

ABSOLUTE MAXIMUM RATINGS
Table 5.
Parameter
Supply Voltage
Input Voltage¹
Input Current
Differential Input Voltage
Output Short-Circuit Duration to GND
Storage Temperature Range
Operating Temperature Range
Junction Temperature Range
Lead Temperature (Soldering, 60 sec)
Rating
16.5 V
GND − 0.3 V to VSY + 0.3 V
±10 mA
±VSY
Indefinite
−65°C to +150°C
−40°C to +125°C
−65°C to +150°C
300°C
1 _{The input pins have clamp diodes to the power supply pins.}
Stresses above those listed under Absolute Maximum Ratings
may cause permanent damage to the device. This is a stress
rating only; functional operation of the device at these or any
other conditions above those indicated in the operational
section of this specification is not implied. Exposure to absolute
maximum rating conditions for extended periods may affect
device reliability.
ADA4665-2
THERMAL RESISTANCE
θJA is specified for the worst-case conditions, that is, a device
soldered in a circuit board for surface-mount packages. This
value was measured using a 4-layer JEDEC standard printed
circuit board.
Table 6. Thermal Resistance
Package Type
θJA
θJC
8-Lead SOIC_N (R-8)
158
43
8-Lead MSOP (RM-8)
186
52
Unit
°C/W
°C/W
ESD CAUTION
Rev. 0 | Page 5 of 20