AD7887_15 Datasheet, PDF (6/24 Pages) Analog Devices – 2.7 V to 5.25 V, Micropower, 2-Channel, 125 kSPS, 12-Bit ADC in 8-Lead MSOP

AD7887
ABSOLUTE MAXIMUM RATINGS
TA = 25°C, unless otherwise noted.
Table 3.
Parameter
VDD to AGND
Analog Input Voltage to AGND
Digital Input Voltage to AGND
Digital Output Voltage to AGND
REFIN/REFOUT to AGND
Input Current to Any Pin Except Supplies¹
Operating Temperature Range
Commercial Temperature Range
A, B Versions
Storage Temperature Range
Junction Temperature
SOIC or MSOP Package Power Dissipation
θJA Thermal Impedance
θJC Thermal Impedance
Lead Temperature, Soldering
Vapor Phase (60 sec)
Infrared (15 sec)
Pb-Free Temperature, Soldering Reflow
ESD
Rating
−0.3 V to +7 V
−0.3 V to VDD + 0.3 V
−0.3 V to VDD + 0.3 V
−0.3 V to VDD + 0.3 V
−0.3 V to VDD + 0.3 V
±10 mA
−40°C to +125°C
−65°C to +150°C
+150°C
450 mW
157°C/W (SOIC)
205.9°C/W (MSOP)
56°C/W (SOIC)
43.74°C/W (MSOP)
215°C
220°C
260(0)°C
4 kV
1 _{Transient currents of up to 100 mA do not cause SCR latch-up.}
Data Sheet
Stresses above those listed under Absolute Maximum Ratings
may cause permanent damage to the device. This is a stress
rating only; functional operation of the device at these or any
other conditions above those indicated in the operational
section of this specification is not implied. Exposure to absolute
maximum rating conditions for extended periods may affect
device reliability.
ESD CAUTION
Rev. E | Page 6 of 24