UG-065 Datasheet, PDF (5/12 Pages) Analog Devices – Battery-powered for portable applications

Evaluation Board User Guide
SOFTWARE TOOLS
In addition to the ready-to-upload examples provided in the
Firmware link of the Development Board section of the
ADXL345 product page, the development board is fully
modifiable and reprogrammable to allow for easy prototyping and
firmware development. Firmware is written in C, and it is compiled
for the ADuC7024 ARM7 processor.
The firmware examples provided on the ADXL345 product page
were written using Keil Microvision and compiled using the
RealView compiler. A free evaluation version of Keil Microvision
is available online. Additional software suites (Keil, IAR, and
GNU) for writing and compiling code are available.
For instructions on how to install and use the software,
refer to the ADuC702x MicroConverter™ GetStarted Guide.
UG-065
To reprogram the board, download the ARMWSD program
from the Uploader link in the Development Board section of
the ADXL345 product page.
When Keil Microvision is installed, complete the following steps:
1. Click and download the Sample Project (EVAL-
ADXL345Z-DB Files.zip) file from the ADXL345
Development Board section of the ADXL345 product
page.
2. Unzip the EVAL-ADXL345Z-DB Files.zip file into a
known directory.
3. Navigate into the EVAL-ADXL345Z-DB folder and open
datalogger.uvproj. This Keil Microvision project allows
users to modify and recompile the program.
Rev. A | Page 5 of 12