OP495_15 Datasheet, PDF (5/16 Pages) Analog Devices – Dual/Quad Rail-to-Rail Operational Amplifiers

ABSOLUTE MAXIMUM RATINGS
Table 4.
Parameter¹
Supply Voltage
Input Voltage
Differential Input Voltage²
Output Short-Circuit Duration
Storage Temperature Range
P, S Packages
Operating Temperature Range
OP295G, OP495G
Junction Temperature Range
P, S Packages
Lead Temperature (Soldering, 60 sec)
Rating
±18 V
±18 V
36 V
Indefinite
−65°C to +150°C
–40°C to +125°C
–65°C to +150°C
300°C
1 _{Absolute maximum ratings apply to packaged parts, unless otherwise noted.}
2 _{For supply voltages less than ±18 V, the absolute maximum input voltage is}
equal to the supply voltage.
Stresses above those listed under Absolute Maximum Ratings
may cause permanent damage to the device. This is a stress
rating only; functional operation of the device at these or any
other conditions above those indicated in the operational
section of this specification is not implied. Exposure to absolute
maximum rating conditions for extended periods may affect
device reliability.
OP295/OP495
THERMAL RESISTANCE
θJA is specified for worst case mounting conditions; that is, θJA
is specified for device in socket for PDIP; θJA is specified for
device soldered to printed circuit board for SOIC package.
Table 5. Thermal Resistance
Package Type
θJA
θJC
8-Lead PDIP (N-8)
103
43
8-Lead SOIC_N (R-8)
158
43
14-Lead PDIP (N-14)
83
39
16-Lead SOIC_W (RW-16)
98
30
Unit
°C/W
°C/W
°C/W
°C/W
ESD CAUTION
Rev. G | Page 5 of 16