OP490_15 Datasheet, PDF (5/16 Pages) Analog Devices – Low Voltage, Micropower, Quad Operational Amplifier

ABSOLUTE MAXIMUM RATINGS
Table 3.
Parameter
Supply Voltage
Digital Input Voltage
Common-Mode Input Voltage
Output Short-Circuit Duration
Storage Temperature Range
Operating Temperature Range
Junction Temperature (TJ) Range
Lead Temperature (Soldering,
60 sec)
Rating
±18 V
[(V−) − 20 V] to [(V+) + 20 V]
[(V−) − 20 V] to [(V+) + 20 V]
Continuous
−65°C to +150°C
−40°C to +85°C
−65°C to +150°C
300°C
Stresses above those listed under Absolute Maximum Ratings
may cause permanent damage to the device. This is a stress
rating only; functional operation of the device at these or any
other conditions above those indicated in the operational
section of this specification is not implied. Exposure to absolute
maximum rating conditions for extended periods may affect
device reliability.
OP490
THERMAL RESISTANCE
θJA is specified for worst-case mounting conditions, that is, θJA is
specified for a device in socket for the PDIP package; θJA is
specified for a device soldered to a printed circuit board (PCB)
for the SOIC package.
Table 4.
Package Type
14-Lead PDIP_N (S-Suffix)
16-Lead SOIC_R (S-Suffix)
θJA
θJC
Unit
76
33
°C/W
92
27
°C/W
ESD CAUTION
Rev. E | Page 5 of 16