OP196_02 Datasheet, PDF (5/16 Pages) Analog Devices – Micropower, Rail-to-Rail Input and Output Operational Amplifiers

ABSOLUTE MAXIMUM RATINGS¹
Supply Voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 V
Input Voltage² . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 V
Differential Input Voltage² . . . . . . . . . . . . . . . . . . . . . . . . 15 V
Output Short Circuit Duration . . . . . . . . . . . . . . . . . Indefinite
Storage Temperature Range
P, S, RU Package . . . . . . . . . . . . . . . . . . . . –65°C to +150°C
Operating Temperature Range
OP196G, OP296G, OP496G, H . . . . . . . –40°C to +125°C
Junction Temperature Range
P, S, RU Package . . . . . . . . . . . . . . . . . . . –65°C to +150°C
Lead Temperature Range (Soldering, 60 sec) . . . . . . . . 300°C
Package Type
␪_JA3
8-Lead Plastic DIP
103
8-Lead SOIC
158
8-Lead TSSOP
240
14-Lead Plastic DIP
83
14-Lead SOIC
120
14-Lead TSSOP
180
␪_JC
Unit
43
°C/W
43
°C/W
43
°C/W
39
°C/W
36
°C/W
35
°C/W
NOTES
1_{Absolute maximum ratings apply to both DICE and packaged parts, unless}
otherwise noted.
2_{For supply voltages less than 15 V, the absolute maximum input voltage is}
equal to the supply voltage.
3_{θJA is specified for the worst case conditions, i.e., θJA is specified for device in}
socket for P-DIP package; θ_JA is specified for device soldered in circuit board
for SOIC and TSSOP packages.
OP196/OP296/OP496
ORDERING GUIDE
Model
Temperature
Range
Package
Description
Package
Option
OP196GS –40°C to +125°C 8-Lead SOIC
SO-8
OP296GP* –40°C to +125°C
OP296GS –40°C to +125°C
OP296HRU –40°C to +125°C
8-Lead Plastic DIP N-8
8-Lead SOIC
SO-8
8-Lead TSSOP
RU-8
OP496GP* –40°C to +125°C
OP496GS –40°C to +125°C
OP496HRU –40°C to +125°C
14-Lead Plastic DIP N-14
14-Lead SOIC
SO-14
14-Lead TSSOP RU-14
*Not for new design, obsolete April 2002.
CAUTION
ESD (electrostatic discharge) sensitive device. Electrostatic charges as high as 4000 V readily
accumulate on the human body and test equipment and can discharge without detection.
Although the OP196/OP296/OP496 feature proprietary ESD protection circuitry, permanent
damage may occur on devices subjected to high-energy electrostatic discharges. Therefore,
proper ESD precautions are recommended to avoid performance degradation or loss of functionalit y.
WARNING!
ESD SENSITIVE DEVICE
REV. C
–5–