EVAL-ADF4213EB2 Datasheet, PDF (5/6 Pages) Analog Devices – 2.35GHz Dual Evaluation Board For PLL Frequency Synthesizer

EVAL-ADF4213EB2
Software Description
The software comes on a CD. If the user runs
“ADF4XXXEvaluationSoftware.exe” on the CD, then the
install wizard installs the software. Follow the on-screen
directions. The software will be installed in a default
directory called “C:\Program Files\Analog
Devices\ADF4xxx Evaluation Software”. To run the
software, simply double click on "ADF4XXX Eval
Software.exe".
The front panel of the evaluation board software is shown
below.
When the main software screen appears, follow the steps
below for initial setup to interface to the part.
Click on Choose Device, and the Device window will
appear. Choose the ADF4213 and click OK.
The settings for this Evaluation Board are saved under
options and presets. Select EVAL-ADF4213EB2. To
manually configure the settings do the following:
Click on the value on the front page to bring up a
submenu. Change the value of the parameter. Click the
OK button. Use this to change the output frequency, PFD
Frequency, Reference Input etc.
The Evaluation board feaures an A/D converter whcih
allows the volatges supplied and current drawn by the part
to be displayed on screen. Press the "Update Voltage and
Current Supply" readback these values.
Figure 5. Software Front Panel
–5–
REV.PrA 01/00