EVAL-AD7716EB Datasheet, PDF (5/12 Pages) Analog Devices – Evaluation Board For 22-Bit Data Acquisition System

EVAL-AD7716EB
AD7716 Evaluation Software
User Manual
The basic system requirements for running the software supplied with the AD7716 Evaluation Board are as
follows:
•
Microsoft Windows 3.0 or later, running in standard or enhanced mode.
•
80286 or higher microprocessor.
•
CGA, EGA, VGA, 8514 Hercules, or other display compatible with Windows.
•
At least 2Mb of RAM
The software is distributed on a single 1.44Mbyte diskette. The diskette contains 13 files, 11 of which are
installed onto the users system. The files that may be found on the diskette are as follows.
1.
AD7716.EXE
2.
GRAPH.VBX
3.
GSW.EXE
4.
GSWDLL.DLL
5.
PORT7716.DLL
6.
READ.ME
7.
SETUP.EXE
8.
SETUP.LST
9.
SETUPKIT.DLL
10. THREED.VBX
11. VBRUN300.DLL
12. VER.DL_
13. SETUP1.EXE
The Evaluation Software is distributed with a setup program called SETUP.EXE. This program simplifies the
installation procedure by copying the files on the distribution disk to the correct directories and making a new
program group (called ANALOG DEVICES) in the PROGRAM MANAGER. The application may be found in
this group. The setup program must be started from either the PROGRAM MANAGER
or the FILE
MANAGER in Windows. To start from the PROGRAM MANAGER simply select the RUN option in the
FILE menu and type A:SETUP.EXE and click on OK. If you are using the FILE MANAGER you can simply
click on SETUP.EXE. The setup program will prompt you to select a directory in which to place the program
files. You can use the default selection or type in your own and click on CONTINUE to proceed with the
installation. When the installation is complete the Evaluation Software can be started by double clicking on the
application icon in the program group called ANALOG DEVICES.
REV. B
–5–
Microsoft is a registered trademark and Windows is a
trademark of Microsoft Corp.