ADTL082 Datasheet, PDF (5/6 Pages) Analog Devices – Low Cost JFET Input Operational Amplifiers

ADTL082/ADTL084
OUTLINE DIMENSIONS
5.00 (0.1968)
4.80 (0.1890)
8
4.00 (0.1574)
3.80 (0.1497) 1
5
6.20 (0.2440)
4 ^{5.80 (0.2284)}
0.25 (0.0098)
0.10 (0.0040)
COPLANARITY
0.10
1.27 (0.0500)
BSC
1.75 (0.0688)
1.35 (0.0532)
0.50 (0.0196) _{× 45°}
0.25 (0.0099)
0.51 (0.0201)
SEATING ^{0.31 (0.0122)}
PLANE
8°
0.25 (0.0098) ^{0° 1.27 (0.0500)}
0.17 (0.0067) ^{0.40 (0.0157)}
COMPLIANT TO JEDEC STANDARDS MS-012-AA
CONTROLLING DIMENSIONS ARE IN MILLIMETERS; INCH DIMENSIONS
(IN PARENTHESES) ARE ROUNDED-OFF MILLIMETER EQUIVALENTS FOR
REFERENCE ONLY AND ARE NOT APPROPRIATE FOR USE IN DESIGN.
Figure 22. 8-Lead Small Outline Package [SOIC_N]
Narrow Body (R-8)
Dimensions shown in millimeters and (inches)
3.20
3.00
2.80
8
3.20
3.00
2.80 1
5 5.15
4.90
4.65
4
PIN 1
0.65 BSC
0.95
0.85
1.10 MAX
0.75
0.15 _0.38
0.00 0.22
0.80
0.23
0.08
8°
0°
0.60
0.40
COPLANARITY SEATING
0.10
PLANE
COMPLIANT TO JEDEC STANDARDS MO-187-AA
Figure 23. 8-Lead Mini Small Outline Package [MSOP]
(RM-8)
Dimensions shown in millimeters
Preliminary Technical Data
5.10
5.00
4.90
14
4.50
4.40
4.30
8
6.40
BSC
1
7
PIN 1
1.05
0.65
1.00
BSC
0.80
1.20 ^0.20
MAX ^0.09
0.75
0.15 _0.30
0.05 _0.19
8°
SEATING
0°
PLANE ^COPLANARITY
0.60
0.45
0.10
COMPLIANT TO JEDEC STANDARDS MO-153-AB-1
Figure 24. 14-Lead Thin Shrink Small Outline Package [TSSOP]
(RU-14)
Dimensions shown in millimeters
8.75 (0.3445)
8.55 (0.3366)
4.00 (0.1575) ¹⁴
3.80 (0.1496) 1
8 _{6.20 (0.2441)}
7 5.80 (0.2283)
0.25 (0.0098)
0.10 (0.0039)
COPLANARITY
0.10
1.27 (0.0500)
BSC
1.75 (0.0689)
1.35 (0.0531)
0.50 (0.0197) _{× 45°}
0.25 (0.0098)
0.51 (0.0201)
0.31 (0.0122)
SEATING
PLANE
8°
0.25 (0.0098) ^{0° 1.27 (0.0500)}
0.17 (0.0067) ^{0.40 (0.0157)}
COMPLIANT TO JEDEC STANDARDS MS-012-AB
CONTROLLING DIMENSIONS ARE IN MILLIMETERS; INCH DIMENSIONS
(IN PARENTHESES) ARE ROUNDED-OFF MILLIMETER EQUIVALENTS FOR
REFERENCE ONLY AND ARE NOT APPROPRIATE FOR USE IN DESIGN.
Figure 25. 14-LeadStandard Small Outline Package [SOIC]
(R-14)
Dimensions shown in millimeters
Rev. PrA | Page 5 of 6